Designed for government inspectors and third-party auditors, the battery-operated portable PAWKIT water activity meter is perfect for water activity spot checks on the go. The PAWKIT is designed to make readings where a benchtop meter is not practical.
Its small size and battery power deliver the ultimate in portability but limit the PAWKIT's accuracy (± 0.02 aw) due to its capacitance sensor and lack of temperature control. The PAWKIT portable water activity meter should only be used in situations where a higher accuracy reading is not critical to ensure or document safety and quality.
Benefits
- Completely portable
- Pocket-sized about 4 x 3 x 1 inch
- Lightweight (4 ounces)
- Runs for about 3 years on 2 button cell batteries
- Easy two-point calibration
- Uses regular AQUALAB cups and standards
The 3.5 x 4-inch PAWKIT weighs just 4 ounces and is designed to fit in a lab coat pocket. It runs on two coin cell batteries that last up to 3 years under normal use. It has an easy two-point calibration using AQUALAB standards.
To make a measurement, flip back the sensor cover and fit the PAWKIT over a standard AQUALAB sample cup. Push the button for a water activity reading in 5 minutes.
Specifications
| MEASUREMENT SPECIFICATIONS |
| Water activity |
Range: 0.00√ to 1.00 aw
Resolution: 0.01 aw
Accuracy: ±0.02 aw
|
| Temperature |
Resolution: 0.1 ℃
Accuracy: ±0.2 ℃
|
| Read time |
5 min
|
| PHYSICAL SPECIFICATIONS |
| Case dimensions |
Length: 10.7 cm (14.21 in)
Width: 6.6 cm (2.60 in)
Height: 2.0 cm (0.79 in)
|
| Case material |
Stainless steel and valox 325 plastic
|
| Sample cup capacity |
7.5 mL (0.26 fl oz), recommended (15 mL (0.47 fl oz), full)
|
| Weight |
115 g (4 oz)
|
| Display |
64 ≥ 128 graphical
|
| Operating temperature |
Minimum: 4 ℃
Maximum: 50 ℃
|
| Operating environment |
0% to 90% relative humidity (noncondensing)
|
| Power |
2-3 V 16 mm coin cell batteries (approx. 3 yr. life in normal use)
|
| COMPLIANCE |
Manufactured under ISO 9001:2015
EM ISO/IEC 17050:2010 (CE Mark)
|
