• Slide bar door closer with open arrest system
• Convenient
• Quick ventilation operation
• 75kg load capacity on the shelves
• Cylinder lock
• Collecting sump at the bottom with grid
• Integrated air ducts to connect to a technical exhaust system
• Safe while filling
• Earthing link end-to-end at the rear panel
• Additional storage shelves
• 225 litres and 850kg/m≤ load capacity on sump pallet
• Safe and approved storage of 200 litre drums
• Height adjustable shelves
• Locking with no unauthorised use

• High-quality fire suppression system in the cabinet interior is automatically triggered in case of fire when the temperature sensor registers an internal temperature greater than 70∞ C
• Each storage level is equipped with a high-quality power strip including metal housing and 10 protective charging sockets. The power strips are pre-mounted on the cabinet rear panel ready for use
• The floor supports for the heavy-duty mesh grid shelves (load capacity 180 kg) are convenient and easily height adjustable
• Mesh grid shelves as storage/loading level, made of powder-coated sheet steel ensure optimal ventilation in the cabinet interior, avoiding heat build-up during battery charging

• Integrated corrosion proof, metal free, air ducts
• Stainless steel shelves
• Interior completely visible
• Easy to clean
• Height adjustable shelves
• 75kg load capacity
• 30mm upstand
• Clear structured front
• Easy handling of products
• Light grey colour
• Load capacity 150kg only on the seal-welded version
• Scratch and impact resistant
• Triple hinged door

• No snag' handles with 2-point locking.
• Warning stickers are supplied as standard.
• Adjustable spill-retaining galvanised shelves for superior spill management with a UDL of 50KG.
• Integral liquid-tight sump encourages the correct handling of spills through the use of absorbents. *Except for wall-mounted cupboards.
• Floor chests have a welded integrated sump, angled lid to discourage article placement and a hasp and staple lock (padlock not supplied).
• Cupboard stands are available which raise the cupboards by 500mm and have an adjustable foot for uneven surfaces.
• Order quantities may apply, please speak to the sales team (Floor chests are not available on express delivery - these are manufactured to order).
• Reaction to Fire Classification EN 13501-1.
• Powder-coated yellow with Germ Guard Active Technology paint
• Designed and manufactured in the UK by QMP. A proud Hazardous Substance Cupboard Manufacturer.
• Dimensions: H.1040 W.900 D.460mm

• No snag' handles with 2-point locking.
• Warning stickers are supplied as standard.
• Adjustable spill-retaining galvanised shelves for superior spill management with a UDL of 50KG.
• Integral liquid-tight sump encourages the correct handling of spills through the use of absorbents. *Except for wall-mounted cupboards.
• Floor chests have a welded integrated sump, angled lid to discourage article placement and a hasp and staple lock (padlock not supplied).
• Cupboard stands are available which raise the cupboards by 500mm and have an adjustable foot for uneven surfaces.
• Order quantities may apply, please speak to the sales team (Floor chests are not available on express delivery - these are manufactured to order).
• Reaction to Fire Classification EN 13501-1.
• Powder-coated yellow with Germ Guard Active Technology paint
• Designed and manufactured in the UK by QMP. A proud Hazardous Substance Cupboard Manufacturer.
• Dimensions: H.610 W.1170 D.460mm

• Fully welded all steel structures for extra strength.
• Seven-lever safe lock for high security.
• Manufactured from 1.5mm mild steel.
• Full-length heavy-duty hinges with concealed fixings to prevent forced entry.
• Warning stickers are supplied as standard.
• It is not recommended to store acids and alkalis together in a single unit as corrosion may occur.
• Integral liquid-tight sump encourages the correct handling of spills through the use of absorbent cleaning materials.
• Powder-coated with white Germ Guard Active Technology anti-bacterial paint
• Reaction to Fire Classification EN 13501-1.
• Designed and manufactured in the UK by QMP. A proud Cupboard Manufacturer.
• Dimensions: 3 Shelves - H.1800 W.1200 D.460

• No 'snag' handles with 2-point locking.
• Warning stickers are supplied as standard.
• Adjustable spill-retaining galvanised shelves for superior spill management with a UDL of 50KG.
• Integral liquid-tight sump encourages the correct handling of spills through the use of absorbents. *Except for wall-mounted cupboards.
• Floor chests have a welded integrated sump, angled lid to discourage article placement and a hasp and staple lock (padlock not supplied).
• Cupboard stands are available which raise the cupboards by 500mm and have an adjustable foot for uneven surfaces.
• Order quantities may apply, please speak to the sales team (Floor chests are not available on express delivery - these are manufactured to order).
• Reaction to Fire Classification EN 13501-1.
• Powder-coated yellow with Germ Guard Active Technology paint
• Designed and manufactured in the UK by QMP. A proud Hazardous Substance Cupboard Manufacturer.
• Dimensions: H.840 W.900 D.460mm

• Robust high-quality construction
• Max five 30-litre cylinders
• Solid 3-point locking with lockable turning lever
• Perfect outdoor installation
• Stainless steel base
• Rolling ramp
• Effective ventilation
• Integrated adjusting aids
• Shelves cabinet width (optional)
• Height-adjustable version (no tools required)
• Lateral cylinder retainer (two 10 litre cylinders)
• Sloping roof with supernatant - water to drain
• Galvanised sheet steel construction with plastic laminated structured surface

• Transport base - easy transportation via pallet truck
• Adjusting aids for easy alignment
• Language-free labelling
• Integrated air ducts to connect to a technical exhaust system
• Scratch-proof robust surface
• Bottom collecting sump - perforated insert
• Load capacity of 75kg
• 30mm upstand
• Locking system (red locked/green unlocked)
• Plastic cump (removable)
• Metal-free interior equipment
• Visible interior
• Seal-welded version available only for 150kg load capacity
• Choice of seven door colours (no extra cost)
• easy and safe access to all containers

Hazardous Cupboards help employers and employees comply with the control of hazardous substances in the workplace. These steel cupboards are available in various sizes including floor cupboards, floor chests, wall mounted and mobile.

• 2 level storage
• Integrated drawers
• Wing doors
• GS-Approved with 50,000 non-wearing open-close cycles
• Doors open at 135°

• Pressure drop values < 150 Pa
• 60cm width
• Complete and even ventilation
• Tested and certified by GS regulations
• Large area flexible lead-through possiblities (top)
• 1858mm large interior height
• Easy and effective mounting connecting pipes and gas equipment in the cabinet
• Cylinder lock
• Mounting rails
• Cylinder retainer
• Tension belts
• Rolling ramp with pneumatic damper
/ul>

• Fully welded all steel structures for extra strength.
• Seven-lever safe lock for high security.
• Manufactured from 1.5mm mild steel.
• Full-length heavy-duty hinges with concealed fixings to prevent forced entry.
• Warning stickers are supplied as standard.
• It is not recommended to store acids and alkalis together in a single unit as corrosion may occur.
• Integral liquid-tight sump encourages the correct handling of spills through the use of absorbent cleaning materials.
• Powder-coated with white Germ Guard Active Technology anti-bacterial paint
• Reaction to Fire Classification EN 13501-1.
• Designed and manufactured in the UK by QMP. A proud Cupboard Manufacturer.
• Dimensions: 1 Shelf - H.900 W.460 D.460

• 10-fold air exchange
• Cooling temp displayed
• Robust construction and longevity
• User-friendly
• Simple setting of the nominal temperatures
• 7-segment LED display for direct monitoring of functions
• Doors and drawers separately lockable with cylinder lock
• Locking state indicator (red/green)
• Max flexibility in the choice of the place of installation
• Integrated drawers
• Second level drawers - optimal utilisation of inside space
• High energy efficiency
• Recirculating air filter system
• Max cooling power +2 ℃ (max 25℃ at room temp)
• Homogeneous cooling effect
• Mobile - simple movement

• Integrated air ducts to connect to a technical exhaust system
• Lockable doors
• Minimal effort to open
• Open arrest system (optional)
• 2 standard colours available (warning yellow and light grey)
• Language-free labelling
• metal-free interior equipment
• Easy and safe access to all containers
• Whole interior of the cabinet is completely visible
• Height adjustable shelves
• 75kg load capacity
• 30mm upstand
• Seal-welded version available (150kg load capacity)
• Perforated insert
• Adjusting aids - effective compensation for an uneven floor

• No snag' handles with 2-point locking.
• Warning stickers are supplied as standard.
• Adjustable spill-retaining galvanised shelves for superior spill management with a UDL of 50KG.
• Integral liquid-tight sump encourages the correct handling of spills through the use of absorbents. *Except for wall-mounted cupboards.
• Floor chests have a welded integrated sump, angled lid to discourage article placement and a hasp and staple lock (padlock not supplied).
• Cupboard stands are available which raise the cupboards by 500mm and have an adjustable foot for uneven surfaces.
• Order quantities may apply, please speak to the sales team (Floor chests are not available on express delivery - these are manufactured to order).
• Reaction to Fire Classification EN 13501-1.
• Powder-coated yellow with Germ Guard Active Technology paint
• Designed and manufactured in the UK by QMP. A proud Hazardous Substance Cupboard Manufacturer.
• Dimensions: H.510 W.610 D.340mm