• Waterproof
• Automatic or manual temperature compensation
• Calibration
• 200 hour battery life approximately with 1.5V AA batteries (x4)
• Clear display
• Auto hold
• Calibration timeout
• PC Connectivity via USB
• GLP
• Intuitive keypad
• Carry case and accessories

• Clogging Prevention System (CPS™)
• Automatic Temperature Compensation (ATC)
• Two-point calibration
• Battery Error Prevention System (BEPS) - alerts the user of low battery power that could adversely affect readings
• Simultaneous pH and temperature measurements on a large dual-line LCD display
• User-friendly two-button design
• Application-specific probe
• Durable IP67 waterproof casing
• Watertight probe connection
• Probe condition indicator
• Automatic pH calibration at one or two points within two memorized buffer sets (standard or NIST)
• On-screen calibration tags
• mV of pH measurement for electrode check
• Selectable temperature unit (℃ or ∞F)
• Auto-off function
• Battery life indication and low battery detection

• Waterproof
• Automatic or manual temperature compensation
• Calibration
• 200 hour battery life approximately with 1.5V AA batteries (x4)
• Clear display
• Auto hold
• Calibration
• PC Connectivity via USB
• GLP
• Intuitive keypad
• Carry case and accessories

• Simultaneous pH, ORP and temperature measurements on a large three-line LCD display
• Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
• User-friendly two-button design
• Selectable temperature unit (℃)
• Electrode condition indicator
• mV of pH measurement for electrode check
• HI-12973 dedicated pH/ORP with integral temperature sensor
• Probe quick connect system
• Battery life indication and low battery detection
• Keystroke confirmation tone
• Auto-off function
• Waterproof casing IP67

• pH measuring range 0 to 14
• Safely measured values due to signal processing in the sensor
• Easy electrode replacement thanks to calibration data stored inside sensor
• Sensor quality monitoring by QSC function
• IDS pH microelectrode
• For measurement of small volumes and in small vessels
• Diameter 5mm
• QSC function
• Integrated temperature sensor
• Memory for 10 calibrations

• Simultaneous pH, ORP and temperature measurements on a large three-line LCD display
• Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
• User-friendly two-button design
• Selectable temperature unit (℃)
• Electrode condition indicator
• mV of pH measurement for electrode check
• HI-12973 dedicated pH/ORP with integral temperature sensor
• Probe quick connect system
• Battery life indication and low battery detection
• Keystroke confirmation tone
• Auto-off function
• Waterproof casing IP67

• Application-specific electrode
• Automatic temperature compensation (ATC)
• Stability indicator for accurate data recording
• Battery-powered
• DIN connection
• Simultaneous pH and temperature measurements on a large dual-line LCD display
• User-friendly two-button design
• Application-specific probe
• Durable IP67 waterproof casing
• Watertight probe connection
• Probe condition indicator
• Automatic pH calibration at one or two points within two memorized buffer sets (standard or NIST)
• On-screen calibration tags
• mV of pH measurement for electrode check
• Selectable temperature unit (℃ or ∞F)
• Auto-off function
• Battery life indication and low battery detection

• Probe Dia.12 x 120mm
• Ideal for pH measurement of liquids and semi-solids
• Easy to use re-calibration feature
• ±0.05 pH accuracy
• 2-year guarantee
• Operating Temperature 0℃ to 50℃

• Repeatable/Efficient - the instrument's auto stable feature will hold stable measurements on the display, resulting in precise, repeatable, and error-free measurements.
• Convenient/Reliable - simple calibration with automatic buffer recognition.
• Calibration is stored in memory and the electrode efficiency can be viewed at any time.
• Measures pH, ORP (mV) and temperature
• Simple 1, 2, or 3 point calibration
• Large, high contrast, LCD display; displays pH/mV and temperature simultaneously
• AUTOLOCK mode holds stable measurements on the display
• Accepts U.S. (7.00, 4.01, 10.01) or NIST (6.86, 4.00, 9.18) buffer sets
• Automatic/manual temperature compensation*
• Automatic lock mode and end point sensing feature will lock in stable measurements
• BNC input allows for any pH or ORP electrode with BNC to be connected*
• 1 year warranty on instrument

• Replacement sensor for the B-713, pH 11, ph 22, pH 33
• Employing the same test principle as standard laboratory electrodes, the LAQUAtwin packs all components into a flat sensor that’s less than 1 mm thick.
• Waterproof construction protects the instrument.

• HI-2202 edge®blu pH Bluetooth® Meter with HALO™ HI-11102 gel-filled Bluetooth electrode
• Two USB ports
• Store up to 1000 log records of data
• GLP Data of the last calibration you perform is stored
• Capacitive touch keypad
• Easy to read 14 cm LCD with wide 150∞ viewing angle
• CAL Check™ technology to warn you if the electrode bulb is not clean or if the buffers are contaminated during calibration

Kit includes:

• 8100 pH meter
• Budget pH electrode
• Temperature probe
• 4.01 and 7.00 pH buffer solutions
• Carrying case

• pH / mV / Temperature Best value for an IP67-rated waterproof pH meter
• Large, three-line LCD – View pH or mV measurement with temperature and % slope
• Built-in memory function – Stores up to 150 measurements along with temperature
• Auto buffer recognition – Automatically identifies USA, NIST or DIN buffer sets for rapid calibration
• Power with AA batteries or use optional AC adapter for benchtop measurements
• Calibration due alarm – Set a visible reminder when it is time to recalibrate the meter
• Selectable ºF/ºC – Choose units to best fit your application
• Features mV offset – Calibrate to a Redox/ORP standard or use for pH electrode diagnostics
• Ready indicator, manual or automatic measurement hold feature and optional automatic shutoff function
• % slope and temperature displayed with each measurement
• Built-in stand – Ideal for easy benchtop or long-term use
• Wall-mount option – Ideal to save on bench space
• Includes innovative Grip-Clip™ – Quickly and easily secures the electrode to your beaker or container
• Compatible with pH electrodes having a BNC connector

• Large double line LCD display with backlight
• Display closer to the surface of tester for a better viewing angle
• Simultaneous display of measurement and temperature
• Easy-to-operate user interface with the addition of the MENU key
• 1 push calibration cap:
• Leakproof
• Fill-line indicator for measurement
• Wider, stable base to stand the tester upright

• Intuitive touchscreen operation
• Efficient workflow support
• Security and compliance - 21 CFR part 11 support, GLP and Password protection
• Memory size: 250 analyses (20.000 data points)
• Data Transfer by PC, Printer or USB stick
• Probes not included

• Simultaneous pH and temperature measurements on a large dual-line LCD display
• Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
• Selectable temperature unit (℃)
• Electrode condition indicator
• mV of pH measurement for electrode check
• HI-12963 dedicated pH with an integral temperature sensor
• Probe quick connect system
• Battery life indication and low battery detection
• Keystroke confirmation tone
• Auto-off function
• Waterproof casing IP67