HI-97745 is an advanced portable photometer for the measurement of free and total chlorine, total hardness, iron – low res, and pH in water.

•  pH
•  Chlorine
•  Iron
•  Hardness

Ranges: Magnesium Hardness 0.00 to 2.00 mg/L (as CaCO3); Calcium Hardness 0.00 to 2.70 mg/L (as 3); Total Hardness 0.00 to 4.70 mg/L (as 3); pH6.5 to 8.5 pH.

This meter offers a superior optical system that utilises a reference detector and narrow band interference filters for extremely fast and repeatable measurements.

• No warm up time before taking a measurement
• Tutorial mode for step-by-step instructions
• Uses either powder or cost saving liquid reagents
• Each photometer is delivered in a cardboard box and is supplied with:

ETI 8000 pH meter features an easy to read, LCD display and is supplied with a budget pH electrode.

• Probe Dia.12 x 120mm
• Ideal for pH measurement of liquids and semi-solids
• Easy to use re-calibration feature
• ±0.05 pH accuracy
• 2-year guarantee
• Operating Temperature 0℃ to 50℃

DON'T FORGET BUFFERS, CALIBRATION SOLUTION AND STORAGE SOLUTION!

• High pH accuracy of ±0.01
• Self-diagnostic messages for easy troubleshooting 
• Measures ORP in addition to pH and Temperature
• Rubber Boot protects gainst knocks and hits
• Easy-To-Read Display
• Customised LCD screen
• Tactile Keypad with a simple, straight forward design for easy operation
• Compact Design Fits Your Palm Perfectly - Designed for easy single-hand operation
• Convenient Benchtop Stand
• User-Friendly Diagnostic, easy to understand trouble-shooting prompts
• Hold function freezes readings momentarily for easy viewing and recording
• Energy and Cost Saving - Switches off automatically after 20 minutes of inactivity
• Automatic Temperature Compensation
• Accurate readings, even under varying temperature conditions
• Non-Volatile Memory -Meter settings are saved, even when batteries run out

• Waterproof
• Automatic or manual temperature compensation
• Calibration
• 200 hour battery life approximately with 1.5V AA batteries (x4)
• Clear display
• Auto hold
• Calibration timeout
• PC Connectivity via USB
• GLP
• Intuitive keypad
• Carry case and accessories

• Simultaneous pH, ORP and temperature measurements on a large three-line LCD display
• Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
• User-friendly two-button design
• Selectable temperature unit (℃)
• Electrode condition indicator
• mV of pH measurement for electrode check
• HI-12973 dedicated pH/ORP with integral temperature sensor
• Probe quick connect system
• Battery life indication and low battery detection
• Keystroke confirmation tone
• Auto-off function
• Waterproof casing IP67

Replacement Gel probe for pH1000A meter

For testing of waste water.

• Easy-to-operate, robust pH/mV-meter with large LCD-display, for mobile routine measurement.
• Meter in carry case with
• pH-sensor SenTix™ 41
• buffer solution STP 4 and STP 7
• stand, beaker
• short instruction manual
• CD-ROM and batteries
• Handy case sets for field applications
• The ProfiLine handhelds are available as single instruments in a case without measurement accessories, but also as sets supporting individual application requirements.
• The case also serves as a small field laboratory.

• 8 hour battery life
• Dual USB ports
• 5.5 inch display
• 3.5 mm probe input
• Capacitive touch keypad
• HI-11310 digital glass body pH electrode with 3.5mm connector and 1m cable

• HORIBA's highly-sensitive, flat sensor technology opens up new possibilities for sampling and sample types. Only a small amount of sample is required, so you can easily sample in situ without the need for beakers or other labware.
• Sensors are easily replaced as required.
• Measure even smaller samples with the LAQUAtwin sampling sheet.
• The sampling sheet allows trace volumes to be analysed. For example, you can even measure the pH of human skin by wiping with a sampling sheet soaked in pure water, and placing it on the sensor.
• Using the HORIBA sampling sheet, volumes down to 0.05 ml can be tested (except for conductivity measurements).
• Carry case comes as standard for handy portability.
• The compact carry case contains everything you need for your measurements, including the standard solution and sampling sheets.
• LAQUAtwin is IP67 rated.

• Application-specific electrode
• Automatic temperature compensation (ATC)
• Stability indicator for accurate data recording
• Battery-powered
• DIN connection
• Simultaneous pH and temperature measurements on a large dual-line LCD display
• Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
• Selectable temperature unit (℃ or ∞F)
• Electrode condition indicator
• mV of pH measurement for electrode check
• FC2423 dedicated pH with integrated temperature sensor
• Probe quick connect system
• Battery life indication and low battery detection
• Keystroke confirmation tone
• Auto-off function
• Waterproof casing IP67

• pH / mV / Temperature Best value for an IP67-rated waterproof pH meter
• Large, three-line LCD – View pH or mV measurement with temperature and % slope
• Built-in memory function – Stores up to 150 measurements along with temperature
• Auto buffer recognition – Automatically identifies USA, NIST or DIN buffer sets for rapid calibration
• Power with AA batteries or use optional AC adapter for benchtop measurements
• Calibration due alarm – Set a visible reminder when it is time to recalibrate the meter
• Selectable ºF/ºC – Choose units to best fit your application
• Features mV offset – Calibrate to a Redox/ORP standard or use for pH electrode diagnostics
• Ready indicator, manual or automatic measurement hold feature and optional automatic shutoff function
• % slope and temperature displayed with each measurement
• Built-in stand – Ideal for easy benchtop or long-term use
• Wall-mount option – Ideal to save on bench space
• Includes innovative Grip-Clip™ – Quickly and easily secures the electrode to your beaker or container
• Compatible with pH electrodes having a BNC connector

• ±0.002 pH accuracy
• Specialised electrode for testing of mash and wort during the brewing process
• Increased traceability
• Versatile data logging
• Superior field usability
• pH 4 & 7 buffer sachets

Spear-type pH combination electrode for penetration measurements in meat, fruit and cheese, with fixed cable and waterproofed DIN plug.

Buy together with XYL-WTW-903843 to use as a puncture knife pH probe.

• Simultaneous pH and temperature measurements on a large dual-line LCD display
• Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
• Selectable temperature unit (℃ or ∞F)
• Electrode condition indicator
• mV or pH measurement for electrode check
• HI-12923 dedicated pH probe with integrated temperature sensor
• Probe quick connect system
• Battery life indication and low battery detection
• Keystroke confirmation tone
• Auto-off function
• Waterproof casing IP67

• pH measuring range 0 to 14
• Safely measured values due to signal processing in the sensor
• Easy electrode replacement thanks to calibration data stored inside sensor
• Sensor quality monitoring by QSC function
• IDS pH microelectrode
• For measurement of small volumes and in small vessels
• Diameter 5mm
• QSC function
• Integrated temperature sensor
• Memory for 10 calibrations