• Waterproof
• Automatic or manual temperature compensation
• Calibration
• 200 hour battery life approximately with 1.5V AA batteries (x4)
• Clear display
• Auto hold
• Calibration timeout
• PC Connectivity via USB
• GLP
• Intuitive keypad
• Carry case and accessories

For testing of waste water.

• Easy-to-operate, robust pH/mV-meter with large LCD-display, for mobile routine measurement.
• Meter in carry case with
• pH-sensor SenTix™ 41
• buffer solution STP 4 and STP 7
• stand, beaker
• short instruction manual
• CD-ROM and batteries
• Handy case sets for field applications
• The ProfiLine handhelds are available as single instruments in a case without measurement accessories, but also as sets supporting individual application requirements.
• The case also serves as a small field laboratory.

• Large double line LCD display with backlight
• Display closer to the surface of tester for a better viewing angle
• Simultaneous display of measurement and temperature
• Easy-to-operate user interface with the addition of the MENU key
• 1 push calibration cap:
• Leakproof
• Fill-line indicator for measurement
• Wider, stable base to stand the tester upright

• Waterproof
• Automatic or manual temperature compensation
• Calibration
• 200 hour battery life approximately with 1.5V AA batteries (x4)
• Clear display
• Auto hold
• Calibration
• PC Connectivity via USB
• GLP
• Intuitive keypad
• Carry case and accessories

• Simultaneous pH and temperature measurements on a large dual-line LCD display
• Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
• Selectable temperature unit (℃ or ∞F)
• Electrode condition indicator
• mV or pH measurement for electrode check
• HI-12923 dedicated pH probe with integrated temperature sensor
• Probe quick connect system
• Battery life indication and low battery detection
• Keystroke confirmation tone
• Auto-off function
• Waterproof casing IP67

• HORIBA's highly-sensitive, flat sensor technology opens up new possibilities for sampling and sample types. Only a small amount of sample is required, so you can easily sample in situ without the need for beakers or other labware.
• Sensors are easily replaced as required.
• Measure even smaller samples with the LAQUAtwin sampling sheet.
• The sampling sheet allows trace volumes to be analysed. For example, you can even measure the pH of human skin by wiping with a sampling sheet soaked in pure water, and placing it on the sensor.
• Using the HORIBA sampling sheet, volumes down to 0.05 ml can be tested (except for conductivity measurements).
• Carry case comes as standard for handy portability.
• The compact carry case contains everything you need for your measurements, including the standard solution and sampling sheets.
• LAQUAtwin is IP67 rated.

Cutting-edge design, capacitive touch keypad and an intuitive user interface are just a few of the great attributes that make edge® stand out as the world's first Hybrid meter on the market.

Key features

• pH, mV pH and ORP reading modes
• capacitive touch keys
• large 140mm LCD display with clear full text readout
• GLP data - records date, time, offset, and cell constant value (K)
• Digital smart electrodes enable edge to automatically recognise and store sensor type, ID and calibration information
• Programmed for basic and advanced modes
• Log-on demand and interval logging
• PC interface via micro USB
• Data download onto USB stick via standard USB

• Easy to use
• Non-volatile memory
• Large, upright LCD
• Click-lock battery compartment
• Easy push-button calibration
• Transparent protective cap
• ±0.1 % accuracy across full pH range
• Auto-buffer recognition
• Auto-calibration functions
• Long-lasting sensor

• 8 hour battery life
• Dual USB ports
• 5.5 inch display
• 3.5 mm probe input
• Capacitive touch keypad
• HI-11310 digital glass body pH electrode with 3.5mm connector and 1m cable

• Waterproof
• Automatic or manual temperature compensation
• Calibration
• 200 hour battery life approximately with 1.5V AA batteries (x4)
• Clear display
• Auto hold
• Calibration timeout
• PC Connectivity via USB
• GLP
• Intuitive keypad
• Carry case and accessories

ETI 8100 Plus pH meter is a three-in-one instrument that features a large easy to read, LCD display. It reads pH over the range of -2 to 16 pH with a resolution of 0.01 pH, mV over the range of -1000 to 1000 mV and temperature over the range of -39.9 to 149.9℃ with a resolution of 0.1℃

• Robust waterproof case gives IP66/67 protection
• Manual/automatic temperature compensation
• Simple pH re-calibration
• 2 year guarantee
• Polygiene BioMaster product protection

The 8100 Plus pH meter is available as a meter only or as a complete kit which includes:

• 1x 8100 Plus pH meter
• 1x Temperature probe
• 1x General purpose pH electrode
• 1x 4.01 pH buffer solution
• 1x 7.00 pH buffer solution
• 1x Carrying case

• Simultaneous pH and temperature measurements on a large dual-line LCD Display
• Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
• Selectable temperature unit (℃ or ∞F)
• Electrode condition indicator
• mV of pH measurement for electrode check
• FC2323 dedicated pH with an integral temperature sensor
• Probe quick connect system
• Battery life indication and low battery detection
• Keystroke confirmation tone
• Auto-off function
• Waterproof casing IP67

Puncture knife, made of stainless steel, for pH measurement of meat, cheese, fruits with a pH electrode model SenTix™ Sp or SenTix Sp-T 900, robust blade with adapted cut-out.

Buy together with XYL-WTW-103730 to use as a puncture knife pH probe.

• ±0.002 pH accuracy
• Specialised electrode for testing of mash and wort during the brewing process
• Increased traceability
• Versatile data logging
• Superior field usability
• pH 4 & 7 buffer sachets