EUTECH
Waterproof ELITEpH with ATC and Temperature Readout
Code:
LIAELITEPH
£134.57 Vat Excl.
Dispatched within 3-5 working days
Related Products
£9.95 vat excl.
£11.94 vat Inc.
Available sizes: small, medium or large
Pack of 100 gloves
3.2mil Powder-Free Nitrile
Non-Sterile
Beaded cuff
Ambidextrous
Latex Free
AQL 1.5
The Eutech Elite pH pocket tester features a simultaneous display of pH and temperature. One of the most common scientific measurements in the world today is pH, which measures the alkalinity and acidity of a liquid.
Common industries that measure pH range from drinking water and wastewater treatment, chemical production, aquaculture, agriculture research and production, environmental monitoring, chemical and life sciences research, biochemical and pharmaceutical research, electronics production to food processing and other industrial applications.
Benefits
Large double line LCD display with backlight
Display closer to the surface of tester for a better viewing angle
Simultaneous display of measurement and temperature
Easy-to-operate user interface with the addition of the MENU key
1 push calibration cap: Leakproof
Fill-line indicator for measurement
Wider, stable base to stand the tester upright
Additional Features:
Bluetooth low energy (BTLE) enabled (optional)
Multi-language instructions available
Pocket tester floats and meets waterproof IP67 rating
Includes (4) AAA batteries for operation and easy replacement
Easy-to-replace sensor
16 other products in the same category:
£244.00 vat excl.
£292.80 vat Inc.
Availability: 20 In Stock
pH measuring range 0 to 14
IDS pH combination electrode with gel electrolyte, plastic shaft and integrated temperature sensor
Safely measured values due to signal processing in the sensor
Easy electrode replacement thanks to calibration data stored inside sensor
Sensor quality monitoring by QSC function
£445.20 vat excl.
£534.24 vat Inc.
Availability: 50 In Stock
Simultaneous pH and temperature measurements on a large dual-line LCD display
Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
Selectable temperature unit (℃)
Electrode condition indicator
mV of pH measurement for electrode check
HI-12963 dedicated pH with an integral temperature sensor
Probe quick connect system
Battery life indication and low battery detection
Keystroke confirmation tone
Auto-off function
Waterproof casing IP67
£495.00 vat excl.
£594.00 vat Inc.
Availability: 10 In Stock
Automatic pH calibration - up to 5 points (NIST, USA pH buffers) / up to 6 points (DIN pH buffers)
0.01 pH resolution
Offset and average slope display
Automatic / manual temperature compensation and temperature calibration function
ORP calibration option
°C & °F temperature readings
Auto log data; built-in memory can store up to 500 data
Auto shut-off (programmable: up to 30 minutes)
Auto stable, auto hold, and real time measurement modes
Calibration alarm (programmable: up to 90 days)
Built-in electrode holder allows 2 electrodes to be attached
Monochrome LCD with white LED backlight: 50 x 50 mm
Casing is IP67 waterproof/dustproof, shock & scratch resistant, non-slip
Powered by 2 x AA batteries
Packaged with electrode and calibration solutions in carrying case
3 years meter warranty
£528.00 vat excl.
£633.60 vat Inc.
Availability: 50 In Stock
pH / mV / ION / Temperature
Backlit, rugged waterproof meter is ideal for any environment
Durable waterproof and dustproof design with IP67 rating
Large, backlit display – View measurement with temperature and % slope
Grip-Clip™ – Quickly and easily secures the pH electrode to your beaker or container
Calibrate up to 5 points automatically with USA or NIST buffer groups (up to 6 points with DIN). New manual option allows calibration with up to 5 custom buffer standards
Intuitive, user-friendly icons – Electrode status displays pH slope
Store up to 500 data sets – Easy USB or RS232 output with optional data cables
Built-in real-time clock stamps stored data and calibration data with time and date – Meets standards for GLP (Good Laboratory Practices)
Built-in stand with wall-mount option – Allows for easy benchtop measurement or storage
Compatible with pH, ORP or ISE electrodes having a BNC connector
£808.40 vat excl.
£970.08 vat Inc.
Availability: 20 In Stock
Waterproof
Automatic or manual temperature compensation
Calibration
200 hour battery life approximately with 1.5V AA batteries (x4)
Clear display
Auto hold
Calibration timeout
PC Connectivity via USB
GLP
Intuitive keypad
Carry case and accessories
£600.75 vat excl.
£720.90 vat Inc.
Availability: 50 In Stock
Simultaneous pH, ORP and temperature measurements on a large three-line LCD display
Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
User-friendly two-button design
Selectable temperature unit (℃)
Electrode condition indicator
mV of pH measurement for electrode check
HI-12973 dedicated pH/ORP with integral temperature sensor
Probe quick connect system
Battery life indication and low battery detection
Keystroke confirmation tone
Auto-off function
Waterproof casing IP67
£594.80 vat excl.
£713.76 vat Inc.
Availability: 20 In Stock
User-friendly two-button design
Application-specific probe
Durable IP67 waterproof casing
Watertight probe connection
Probe condition indicator
£569.80 vat excl.
£683.76 vat Inc.
Availability: 19 In Stock
Application-specific electrode
Automatic temperature compensation (ATC)
Stability indicator for accurate data recording
Battery-powered
DIN connection
Simultaneous pH and temperature measurements on a large dual-line LCD display
Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
Selectable temperature unit (℃ or ∞F)
Electrode condition indicator
mV of pH measurement for electrode check
FC2423 dedicated pH with integrated temperature sensor
Probe quick connect system
Battery life indication and low battery detection
Keystroke confirmation tone
Auto-off function
Waterproof casing IP67
£428.00 vat excl.
£513.60 vat Inc.
Availability: 20 In Stock
pH measuring range 0 to 14
Safely measured values due to signal processing in the sensor
Easy electrode replacement thanks to calibration data stored inside sensor
Sensor quality monitoring by QSC function
IDS pH microelectrode
For measurement of small volumes and in small vessels
Diameter 5mm
QSC function
Integrated temperature sensor
Memory for 10 calibrations
£569.80 vat excl.
£683.76 vat Inc.
Availability: 20 In Stock
Application-specific electrode
Automatic temperature compensation (ATC)
Stability indicator for accurate data recording
Battery-powered
DIN connection
Simultaneous pH and temperature measurements on a large dual-line LCD display
User-friendly two-button design
Application-specific probe
Durable IP67 waterproof casing
Watertight probe connection
Probe condition indicator
Automatic pH calibration at one or two points within two memorized buffer sets (standard or NIST)
On-screen calibration tags
mV of pH measurement for electrode check
Selectable temperature unit (℃ or ∞F)
Auto-off function
Battery life indication and low battery detection
New
£134.00 vat excl.
£160.80 vat Inc.
Availability: 10 In Stock
Replacement Gel probe for pH1000A meter
£568.70 vat excl.
£682.44 vat Inc.
Availability: 20 In Stock
Clogging Prevention System (CPS™)
Automatic Temperature Compensation (ATC)
Two-point calibration
Battery Error Prevention System (BEPS) - alerts the user of low battery power that could adversely affect readings
Simultaneous pH and temperature measurements on a large dual-line LCD display
User-friendly two-button design
Application-specific probe
Durable IP67 waterproof casing
Watertight probe connection
Probe condition indicator
Automatic pH calibration at one or two points within two memorized buffer sets (standard or NIST)
On-screen calibration tags
mV of pH measurement for electrode check
Selectable temperature unit (℃ or ∞F)
Auto-off function
Battery life indication and low battery detection
£59.00 vat excl.
£70.80 vat Inc.
Availability: 40 In Stock
Easy to use
Non-volatile memory
Large, upright LCD
Click-lock battery compartment
Easy push-button calibration
Transparent protective cap
±0.1 % accuracy across full pH range
Auto-buffer recognition
Auto-calibration functions
Long-lasting sensor
New Low Price
£2,055.00 vat excl.
£2,466.00 vat Inc.
Availability: 50 In Stock
Intuitive touchscreen operation
Efficient workflow support
Security and compliance - 21 CFR part 11 support, GLP and Password protection
Memory size: 250 analyses (20.000 data points)
Data Transfer by PC, Printer or USB stick
Probes not included
New
£318.00 vat excl.
£381.60 vat Inc.
Availability: 10 In Stock
Spear-type pH combination electrode for penetration measurements in meat, fruit and cheese, with fixed cable and waterproofed DIN plug.
Buy together with XYL-WTW-903843 to use as a puncture knife pH probe.
£550.90 vat excl.
£661.08 vat Inc.
Availability: 50 In Stock
Simultaneous pH, ORP and temperature measurements on a large three-line LCD display
Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
User-friendly two-button design
Selectable temperature unit (℃)
Electrode condition indicator
mV of pH measurement for electrode check
HI-12973 dedicated pH/ORP with integral temperature sensor
Probe quick connect system
Battery life indication and low battery detection
Keystroke confirmation tone
Auto-off function
Waterproof casing IP67
This website uses cookies to ensure you get the best experience on our website.
Got it!