The Funke Gerber LactoFlash is an accurate, reliable instrument for rapid analysis of the main constituents of milk. It directly measures Fat and S.N.F. (Solid Non Fat) and then calculates Density, Protein, Lactose and Freezing Point.
The Funke Gerber LactoFlash is an accurate, reliable instrument for rapid analysis of the main constituents of milk. It directly measures Fat and S.N.F. (Solid Non Fat) and then calculates Density, Protein, Lactose and Freezing Point.
Countless installations in institutes and laboratories all over the world attest to the outstanding quality, reliability and accuracy of this chemical analysis device.The following parameters can be determined quickly and reliably with just one measurement:
Parameter
Resolution
Reproducibility(r)
Measuring Range
Fat
0.01%
0.02% in 0 ... 5% range 0.2 % in 5 ... 30 % range
0 ... 30%
SNF
0.01%
0.04%
0 ...15%
Further parameters are determined based on calculational algorithms:
Parameter
Resolution
Reproducibility(r)
Measuring Range
Density
0.0001
0.001
no limit
Protein
0.01%
0.03%
no limit / calculated value
Lactose
0.01%
0.02%
no limit / calculated value
Gpp
0.001oC
0.002oC
no limit / calculated value
Specification
Technical Specification
Sample capacity:
up to 120/h
Sample volume:
from 12 ml to 20 ml
Interfaces:
1 x parallel, 1 x serial (RS 232 / 9.600 baud), USB 6 volt electrical power supply for thermal printer
Our standard delivery is 3-5 working days (where products are available) Monday to Friday, excluding public holidays when you order by 2pm. Details of our returns and cancellation policy can be found in our Returns Policy & Section 11 of our Terms and Conditions. For more information please contact us on 01924 444 577 or Email Us.
Achieve reproducible results you can trust. Precisely adjust the tilt angle in 1° increments, vary the speed by 1 rpm and set temperature in 1°C increments with intuitive touchpad controls.
Innovative speed ramping feature slowly increases speed to desired setpoint to avoid splashing. Smooth rocking or waving motion is maintained with unique, state-of-the-art motor and electronics.
Spill-resistant design, overload protection with audio/visual alarm on digital models and audible alarm on analog models, caution hot indicator
Hybridisations, Cell Cultures, Blotting Techniques, Staining and Destaining Gels
Easy-to-read, independent LED displays for temperature, speed/tilt angle and time, allow the operator to view all settings simultaneously
Rotor Compatibility: Angle 10 x 50 ml FA ID; Angle 20 x 10 ml RB ID Hi; Angle 30 x 15 ml RB/FA ID; Angle 4 x 85ml RB ID Hi; Angle 44 x 1.5 / 2.0 ml ID V2; Angle 6 x 250 ml FB ID; Angle 6 x 50 ml RB ID Hi; Angle 6 x 85 ml RB ID; Swing out 16 x 50 ml ID; Swing out 2 x 3MTP ID; Swing out 4 x 250 ml ID
Rotor Recognition: Auto
Running Time: 10 sec to 99 h 59 min 59 sec; Continuous
Power Consumption: 640W
Working Environment: 2°C – 35°C, 80%RH, non-condensing
Calibration and maintenance set with technical buffer solution for gel electrodes, 3 bottles with 1 l each: pH 4.01/ 7.00/ 10.01 Trace, 2 bottles with 250 ml 3 mol/l KCl solution.