• Digital control of time, temperature and shaking speed for accuracy and repeatability
• Variable speed: 50 to 250 rpm
• Temperature range: 25 to 80℃
• Load up to 8 kg
• Interchangeable platforms for shaking/incubating different vessels
• Temperature control by microprocessor plus forced heated air circulation ensures a constant and even temperature within the chamber
• Robust, compact construction with stainless steel inside the chamber
• Equipped with a direct drive shaking system for reliable, long-term operation
• Simple to programme time, where1 minute to 96 hours or non-stop
• State-of-the-art motor, thermal insulation materials and temperature PID-control decreases the energy consumption
• Platform sold separately

• Achieve reproducible results you can trust. Precisely adjust the tilt angle in 1° increments, vary the speed by 1 rpm and set temperature in 1°C increments with intuitive touchpad controls.
• Innovative speed ramping feature slowly increases speed to desired setpoint to avoid splashing. Smooth rocking or waving motion is maintained with unique, state-of-the-art motor and electronics.
• Spill-resistant design, overload protection with audio/visual alarm on digital models and audible alarm on analog models, caution hot indicator
• Hybridisations, Cell Cultures, Blotting Techniques, Staining and Destaining Gels
• Easy-to-read, independent LED displays for temperature, speed/tilt angle and time, allow the operator to view all settings simultaneously
• Detachable 3-wire cord and plug (included)
• Cast aluminium housing with polycarbonate lid

• Adjustment knob with dial markings for variable speed control
• Secure mixing - microplate adapter unique mode of attachment
• Can be run in 4 to 40℃ (39 to 104∞F), 20% to 85% relative humidity, non-condensing conditions
• Consistent mixing speed
• Microprocessor control
• Construction: Cycoloy
• Applications: ELISA Assays, PCR Preparations, Digestions, Cell Disruptions

Chuck Cover e-A51 for Achiever 5000 Overhead Stirrer

• 3D rotation, reciprocation and vibration functions all in one product
• 3D rotation speed: 1 to 100 rpm
• Reciprocal 3D rotation: 1 to 360 deg. turning angle
• Vibration: 1 to 6∞ turning angle, programmable in a burst of 1 to 5 seconds
• Fully programmable sequence of functions
• Loads up to 1.0 kg
• Very easy to operate, with simple set-up of multi-segment programs via push buttons and the 2-line LCD status display
• Compact, with a low profile and small footprint, and extremely quiet in operation - fits neatly and unobtrusively into the workspace
• Smooth, non-slip mat supplied as standard - prevents vessels from slipping
• All actions - rotation, reciprocation and vibration - can be set for continuous or timed operation, or linked together in different combinations to ensure optimum mixing conditions for your application
• Reliable stepper motor and sturdy construction will deliver years of consistent performance
• Ambient operating temperature range of 4 to 40℃ allows use in cold room or incubator.

Block for one deep-well plate for Axygen® 96/2000ul for Grant Instruments TS-DW Thermoshaker

Stirrer Shaft for Achiever 5000 Series - 45x0.7 cm, Anchor Blade

• Motion: Rocking, 0 √¢‚Ǩ‚Äú 15¬∞
• Capacity: 7.3 kg
• Speed Range: 1 rpm √¢‚Ǩ‚Äú 75 rpm
• Basic control knobs with dial markings for speed, tilt angle and time
• Applications: Mixing Blood Samples, DNA Extractions, Blotting Techniques, Staining and Destaining Gels, Hybridizations

• Adjustable speed control: 300 to 3500rpm
• 4mm orbit
• Set and actual values of time and speed displayed
• Acceleration time to max speed: 15 seconds
• Speed and time under microprocessor control
• LCD display indicates two lines of values: the set and actual values of speed and time
• Platforms are sold separately 

• Motion: Orbital, 3 mm
• Capacity: 3.6 kg
• Speed Range: 100 rpm to 1200 rpm
• Temperature Range: Ambient +5°C to 65°C
• Dimensions: 27 cm x 43.2 cm x 27.9 cm

• Digital control of time, temperature and shaking speed for accuracy and repeatability
• Variable speed: 50 to 250 rpm
• Temperature setting range: 25 to 42℃
• Load up to 2.5 kg
• Interchangeable platforms for shaking/incubating different vessels
• Temperature control by microprocessor plus forced heated air circulation ensures a constant and even temperature within the chamber
• Equipped with a direct drive shaking system for reliable, long-term operation
• Simple to programme time, temperature and shaking speed using clear 2-line 16 character LCD
• Option of four easily interchangeable platforms for a wide range of different
• Robust, compact construction with clear 7mm thick Plexiglass panels for easy visibility of chamber contents
• Designed for easy assembly/disassembly – easy to move from one location to another
• Platform sold separately

• Easily process up to 50 samples at one time
• Easy to clean one-piece stainless steel housing that is perfect to use in all environments - especially clean rooms
• Can be run in 4 to 40℃ (39 to 104∞F), 20% to 85% relative humidity, non-condensing conditions
• Construction: Stainless steel foam rack for (50) 12 mm diameter tubes (included), interchangeable foam racks for vortexing tubes from 10 - 29 mm in diameter
• Applications: Suspensions, Genotyping, High Throughput DNA and RNA Testing in Clinical Labs

• Fast heat-up and cooling times
• Temperature setting range +4?C to +100?C
• Temperature control range 15?C below ambient to +100?C
• Shaking speed: 250 to 1400 rpm
• Temperature uniformity ±0.1?C
• Even mixing across the thermoshaker block
• Excellent uniformity across the block
• Clear 16 x 2 character LCD display indicates the set and actual time of operation, mixing speed and temperature
• Digital timer with sound alarm 1 min to 96 hours
• Simultaneous or independent heating and mixing functions

Choice of 5 interchangeable blocks including a block suitable for microplates (sold separately)

• HC18 20 (20 x 0.5 ml and 12 x 1.5 ml microtubes)
• HC32 (20 x 0.2 ml and 12 x 1.5 ml microtubes)
• HC24N (24 x 1.5 ml microtubes)
• HC24 (24 x 2 ml microtubes)
• HC96 (96-well microplate for PCR, 0.2 ml)