The HI-991001 is a durable, portable, pH and temperature meter used for most pH measurements encountered in manufacturing and environmental testing protocols.
Benefits
Simultaneous pH and temperature measurements on a large dual-line LCD display
Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
Selectable temperature unit (℃)
Electrode condition indicator
mV of pH measurement for electrode check
HI-12963 dedicated pH with an integral temperature sensor
Probe quick connect system
Battery life indication and low battery detection
Keystroke confirmation tone
Auto-off function
Waterproof casing IP67
The meter is provided with a very rugged titanium bodied electrode with built-in temperature sensor for temperature compensated pH and temperature readings. It also contains an integral pH sensor pre-amplifier to provide stable measurements in electrically noisy environments.
Each meter is supplied complete with:
HI-12963 pH/temperature probe with titanium body and DIN connector with 1m cable
pH 4.01 & 7.01 buffer sachet
HI-700601 General electrode cleaning solution (2 sachets)
100mL beaker
Alkaline batteries: 1.5V AAA x3
Rugged carrying case
Calibration certificate of meter
Calibration certificate of the probe
Instruction manual
Specifications
pH Range
-2.00 to 16.00 pH
Temperature Range
-5.0 to 105.0℃
mV
±825 mV (pH-mV)
pH Resolution
0.01 pH
Temperature Resolution
0.1℃
mV Resolution
1 mV
pH Accuracy
±0.02 pH
Temperature Accuracy
±0.5℃
pH Electrode
HI-12963 pre-amplified pH and temperature probe with titanium body, Quick Connect DIN connector and 1 m (3.3') cable (included); please note: HI-12963 is limited to be used from 0 to 13 pH and from 0 to 80deg.
Battery Type / Life
3 x 1.5V AAA / approx. 1400 hours of continuous use
Our standard delivery is 3-5 working days (where products are available) Monday to Friday, excluding public holidays when you order by 2pm. Details of our returns and cancellation policy can be found in our Returns Policy & Section 11 of our Terms and Conditions. For more information please contact us on 01924 444 577 or Email Us.
Replacement sensor for the B-713, pH 11, ph 22, pH 33
Employing the same test principle as standard laboratory electrodes, the LAQUAtwin packs all components into a flat sensor that’s less than 1 mm thick.
HORIBA's highly-sensitive, flat sensor technology opens up new possibilities for sampling and sample types. Only a small amount of sample is required, so you can easily sample in situ without the need for beakers or other labware.
Sensors are easily replaced as required.
Measure even smaller samples with the LAQUAtwin sampling sheet.
The sampling sheet allows trace volumes to be analysed. For example, you can even measure the pH of human skin by wiping with a sampling sheet soaked in pure water, and placing it on the sensor.
Using the HORIBA sampling sheet, volumes down to 0.05 ml can be tested (except for conductivity measurements).
Carry case comes as standard for handy portability.
The compact carry case contains everything you need for your measurements, including the standard solution and sampling sheets.