• Spherical glass tip
• 3.5 connection
• Easy to use
• Glass electrode body
• Double junction reference
• CPS sleeve junction
• 6 months warranty

Replacement Gel probe for pH1000A meter

• Repeatable/Efficient - the instrument's auto stable feature will hold stable measurements on the display, resulting in precise, repeatable, and error-free measurements.
• Convenient/Reliable - simple calibration with automatic buffer recognition.
• Calibration is stored in memory and the electrode efficiency can be viewed at any time.
• Measures pH, ORP (mV) and temperature
• Simple 1, 2, or 3 point calibration
• Large, high contrast, LCD display; displays pH/mV and temperature simultaneously
• AUTOLOCK mode holds stable measurements on the display
• Accepts U.S. (7.00, 4.01, 10.01) or NIST (6.86, 4.00, 9.18) buffer sets
• Automatic/manual temperature compensation*
• Automatic lock mode and end point sensing feature will lock in stable measurements
• BNC input allows for any pH or ORP electrode with BNC to be connected*
• 1 year warranty on instrument

• Conic tip
• 3.5 connection
• Easy to use
• Glass body
• 6 months warranty

• HI-2202 edge®blu pH Bluetooth® Meter with HALO™ HI-11102 gel-filled Bluetooth electrode
• Two USB ports
• Store up to 1000 log records of data
• GLP Data of the last calibration you perform is stored
• Capacitive touch keypad
• Easy to read 14 cm LCD with wide 150∞ viewing angle
• CAL Check™ technology to warn you if the electrode bulb is not clean or if the buffers are contaminated during calibration

• Automatic pH calibration - up to 5 points (NIST, USA pH buffers) / up to 6 points (DIN pH buffers)  
• 0.01 pH resolution
• Offset and average slope display 
• Automatic / manual temperature compensation and temperature calibration function
• ORP calibration option
• °C & °F temperature readings
• Auto log data; built-in memory can store up to 500 data
• Auto shut-off (programmable: up to 30 minutes)
• Auto stable, auto hold, and real time measurement modes
• Calibration alarm (programmable: up to 90 days)
• Built-in electrode holder allows 2 electrodes to be attached
• Monochrome LCD with white LED backlight: 50 x 50 mm
• Casing is IP67 waterproof/dustproof, shock & scratch resistant, non-slip
• Powered by 2 x AA batteries
• Packaged with electrode and calibration solutions in carrying case
• 3 years meter warranty

• Large double line LCD display with backlight
• Display closer to the surface of tester for a better viewing angle
• Simultaneous display of measurement and temperature
• Easy-to-operate user interface with the addition of the MENU key
• 1 push calibration cap:
• Leakproof
• Fill-line indicator for measurement
• Wider, stable base to stand the tester upright

• Application-specific electrode
• Automatic temperature compensation (ATC)
• Stability indicator for accurate data recording
• Battery-powered
• DIN connection
• Simultaneous pH and temperature measurements on a large dual-line LCD display
• Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
• Selectable temperature unit (℃ or ∞F)
• Electrode condition indicator
• mV of pH measurement for electrode check
• FC2423 dedicated pH with integrated temperature sensor
• Probe quick connect system
• Battery life indication and low battery detection
• Keystroke confirmation tone
• Auto-off function
• Waterproof casing IP67

• Easy to use
• Non-volatile memory
• Large, upright LCD
• Click-lock battery compartment
• Easy push-button calibration
• Transparent protective cap
• ±0.1 % accuracy across full pH range
• Auto-buffer recognition
• Auto-calibration functions
• Long-lasting sensor

• Waterproof
• Automatic or manual temperature compensation
• Calibration
• 200 hour battery life approximately with 1.5V AA batteries (x4)
• Clear display
• Auto hold
• Calibration timeout
• PC Connectivity via USB
• GLP
• Intuitive keypad
• Carry case and accessories

• Simple menu
• ISM® Compatible
• uFocus™
• T-pad
• Endpoint signalling
• IP67 - (weatherproof)
• Outdoor mode (maximises battery life)
• Sunlight-proof

• Replacement sensor for the B-713, pH 11, ph 22, pH 33
• Employing the same test principle as standard laboratory electrodes, the LAQUAtwin packs all components into a flat sensor that’s less than 1 mm thick.
• Waterproof construction protects the instrument.

• Large, easy-to-read display
• Ready indicator let you know when readings are stable
• Up to 5-point calibration with auto-buffer recognition
• Non-volatile memory holds up to 100 data points
• Integral electrode holder
• Use in all types of food processing
• Dual Measurement Includes Temperature Display With All Readings
• 100 Point Memory
• Detachable Electrode Holder
• Compact Footprint Saves Valuable Bench Space
• Custom Setup Options
• Hold Function And Stability Indicator
• 3-Year Warranty

• Application-specific electrode
• Automatic temperature compensation (ATC)
• Stability indicator for accurate data recording
• Battery-powered
• DIN connection
• Simultaneous pH and temperature measurements on a large dual-line LCD display
• User-friendly two-button design
• Application-specific probe
• Durable IP67 waterproof casing
• Watertight probe connection
• Probe condition indicator
• Automatic pH calibration at one or two points within two memorized buffer sets (standard or NIST)
• On-screen calibration tags
• mV of pH measurement for electrode check
• Selectable temperature unit (℃ or ∞F)
• Auto-off function
• Battery life indication and low battery detection

• ±0.002 pH accuracy
• Specialised electrode for testing of mash and wort during the brewing process
• Increased traceability
• Versatile data logging
• Superior field usability
• pH 4 & 7 buffer sachets

• pH / mV / ION / Temperature
• Backlit, rugged waterproof meter is ideal for any environment
• Durable waterproof and dustproof design with IP67 rating
• Large, backlit display – View measurement with temperature and % slope
• Grip-Clip™ – Quickly and easily secures the pH electrode to your beaker or container
• Calibrate up to 5 points automatically with USA or NIST buffer groups (up to 6 points with DIN). New manual option allows calibration with up to 5 custom buffer standards
• Intuitive, user-friendly icons – Electrode status displays pH slope
• Store up to 500 data sets – Easy USB or RS232 output with optional data cables
• Built-in real-time clock stamps stored data and calibration data with time and date – Meets standards for GLP (Good Laboratory Practices)
• Built-in stand with wall-mount option – Allows for easy benchtop measurement or storage
• Compatible with pH, ORP or ISE electrodes having a BNC connector