For testing of waste water.

• Easy-to-operate, robust pH/mV-meter with large LCD-display, for mobile routine measurement.
• Meter in carry case with
• pH-sensor SenTix™ 41
• buffer solution STP 4 and STP 7
• stand, beaker
• short instruction manual
• CD-ROM and batteries
• Handy case sets for field applications
• The ProfiLine handhelds are available as single instruments in a case without measurement accessories, but also as sets supporting individual application requirements.
• The case also serves as a small field laboratory.

• 8 hour battery life
• Dual USB ports
• 5.5 inch display
• 3.5 mm probe input
• Capacitive touch keypad
• HI-11310 digital glass body pH electrode with 3.5mm connector and 1m cable

ETI 8000 pH meter features an easy to read, LCD display and is supplied with a budget pH electrode.

• Probe Dia.12 x 120mm
• Ideal for pH measurement of liquids and semi-solids
• Easy to use re-calibration feature
• ±0.05 pH accuracy
• 2-year guarantee
• Operating Temperature 0℃ to 50℃

DON'T FORGET BUFFERS, CALIBRATION SOLUTION AND STORAGE SOLUTION!

• Simultaneous pH, ORP and temperature measurements on a large three-line LCD display
• Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
• User-friendly two-button design
• Selectable temperature unit (℃)
• Electrode condition indicator
• mV of pH measurement for electrode check
• HI-12973 dedicated pH/ORP with integral temperature sensor
• Probe quick connect system
• Battery life indication and low battery detection
• Keystroke confirmation tone
• Auto-off function
• Waterproof casing IP67

• Application-specific electrode
• Automatic temperature compensation (ATC)
• Stability indicator for accurate data recording
• Battery-powered
• DIN connection
• Simultaneous pH and temperature measurements on a large dual-line LCD display
• Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
• Selectable temperature unit (℃ or ∞F)
• Electrode condition indicator
• mV of pH measurement for electrode check
• FC2423 dedicated pH with integrated temperature sensor
• Probe quick connect system
• Battery life indication and low battery detection
• Keystroke confirmation tone
• Auto-off function
• Waterproof casing IP67

• Large double line LCD display with backlight
• Display closer to the surface of tester for a better viewing angle
• Simultaneous display of measurement and temperature
• Easy-to-operate user interface with the addition of the MENU key
• 1 push calibration cap:
• Leakproof
• Fill-line indicator for measurement
• Wider, stable base to stand the tester upright

Replacement Gel probe for pH1000A meter

• Automatic pH calibration - up to 5 points (NIST, USA pH buffers) / up to 6 points (DIN pH buffers)  
• 0.01 pH resolution
• Offset and average slope display 
• Automatic / manual temperature compensation and temperature calibration function
• ORP calibration option
• °C & °F temperature readings
• Auto log data; built-in memory can store up to 500 data
• Auto shut-off (programmable: up to 30 minutes)
• Auto stable, auto hold, and real time measurement modes
• Calibration alarm (programmable: up to 90 days)
• Built-in electrode holder allows 2 electrodes to be attached
• Monochrome LCD with white LED backlight: 50 x 50 mm
• Casing is IP67 waterproof/dustproof, shock & scratch resistant, non-slip
• Powered by 2 x AA batteries
• Packaged with electrode and calibration solutions in carrying case
• 3 years meter warranty

• Intuitive operation
• Ergonomic design
• Waterproof
• Large display
• Automatic and manual endpoint recording
• Acoustic endpoint signal
• Visual endpoint signal

• Large double line LCD display with backlight
• Display closer to the surface of tester for a better viewing angle
• Simultaneous display of measurement and temperature
• Easy-to-operate user interface with the addition of the MENU key
• 1 push calibration cap
• Leakproof
• Fill-line indicator for measurement
• Wider, stable base to stand the tester upright

• Din connection
• Replaceable Electrode
• Application-specific electrode
• Automatic temperature compensation (ATC)
• Stability indicator for accurate data recording

ETI 8100 Plus pH meter is a three-in-one instrument that features a large easy to read, LCD display. It reads pH over the range of -2 to 16 pH with a resolution of 0.01 pH, mV over the range of -1000 to 1000 mV and temperature over the range of -39.9 to 149.9℃ with a resolution of 0.1℃

• Robust waterproof case gives IP66/67 protection
• Manual/automatic temperature compensation
• Simple pH re-calibration
• 2 year guarantee
• Polygiene BioMaster product protection

The 8100 Plus pH meter is available as a meter only or as a complete kit which includes:

• 1x 8100 Plus pH meter
• 1x Temperature probe
• 1x General purpose pH electrode
• 1x 4.01 pH buffer solution
• 1x 7.00 pH buffer solution
• 1x Carrying case

• HORIBA's highly-sensitive, flat sensor technology opens up new possibilities for sampling and sample types. Only a small amount of sample is required, so you can easily sample in situ without the need for beakers or other labware.
• Sensors are easily replaced as required.
• Measure even smaller samples with the LAQUAtwin sampling sheet.
• The sampling sheet allows trace volumes to be analysed. For example, you can even measure the pH of human skin by wiping with a sampling sheet soaked in pure water, and placing it on the sensor.
• Using the HORIBA sampling sheet, volumes down to 0.05 ml can be tested (except for conductivity measurements).
• Carry case comes as standard for handy portability.
• The compact carry case contains everything you need for your measurements, including the standard solution and sampling sheets.
• LAQUAtwin is IP67 rated.

• Large double line LCD display with backlight
• Display closer to the surface of tester for a better viewing angle
• Simultaneous display of measurement and temperature
• Easy-to-operate user interface with the addition of the MENU key
• 1 push calibration cap: Leakproof
• Fill-line indicator for measurement
• Wider, stable base to stand the tester upright

• pH / mV / Temperature Best value for an IP67-rated waterproof pH meter
• Large, three-line LCD – View pH or mV measurement with temperature and % slope
• Built-in memory function – Stores up to 150 measurements along with temperature
• Auto buffer recognition – Automatically identifies USA, NIST or DIN buffer sets for rapid calibration
• Power with AA batteries or use optional AC adapter for benchtop measurements
• Calibration due alarm – Set a visible reminder when it is time to recalibrate the meter
• Selectable ºF/ºC – Choose units to best fit your application
• Features mV offset – Calibrate to a Redox/ORP standard or use for pH electrode diagnostics
• Ready indicator, manual or automatic measurement hold feature and optional automatic shutoff function
• % slope and temperature displayed with each measurement
• Built-in stand – Ideal for easy benchtop or long-term use
• Wall-mount option – Ideal to save on bench space
• Includes innovative Grip-Clip™ – Quickly and easily secures the electrode to your beaker or container
• Compatible with pH electrodes having a BNC connector