• HORIBA's highly-sensitive, flat sensor technology opens up new possibilities for sampling and sample types. Only a small amount of sample is required, so you can easily sample in situ without the need for beakers or other labware.
• Sensors are easily replaced as required.
• Measure even smaller samples with the LAQUAtwin sampling sheet.
• The sampling sheet allows trace volumes to be analysed. For example, you can even measure the pH of human skin by wiping with a sampling sheet soaked in pure water, and placing it on the sensor.
• Using the HORIBA sampling sheet, volumes down to 0.05 ml can be tested (except for conductivity measurements).
• Carry case comes as standard for handy portability.
• The compact carry case contains everything you need for your measurements, including the standard solution and sampling sheets.
• LAQUAtwin is IP67 rated.

• The electrode FC2023 dedicated pH with an integral temperature sensor
• Probe quick connect system
• Battery life indication and low battery detection
• Keystroke confirmation tone
• Auto-off function
• Waterproof casing IP67

• Large double line LCD display with backlight
• Display closer to the surface of tester for a better viewing angle
• Simultaneous display of measurement and temperature
• Easy-to-operate user interface with the addition of the MENU key
• 1 push calibration cap: Leakproof
• Fill-line indicator for measurement
• Wider, stable base to stand the tester upright

• Conic tip
• 3.5 connection
• Easy to use
• Glass body
• 6 months warranty

• High pH accuracy of ±0.01
• Self-diagnostic messages for easy troubleshooting 
• Measures ORP in addition to pH and Temperature
• Rubber Boot protects gainst knocks and hits
• Easy-To-Read Display
• Customised LCD screen
• Tactile Keypad with a simple, straight forward design for easy operation
• Compact Design Fits Your Palm Perfectly - Designed for easy single-hand operation
• Convenient Benchtop Stand
• User-Friendly Diagnostic, easy to understand trouble-shooting prompts
• Hold function freezes readings momentarily for easy viewing and recording
• Energy and Cost Saving - Switches off automatically after 20 minutes of inactivity
• Automatic Temperature Compensation
• Accurate readings, even under varying temperature conditions
• Non-Volatile Memory -Meter settings are saved, even when batteries run out

• Simultaneous pH, ORP and temperature measurements on a large three-line LCD display
• Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
• User-friendly two-button design
• Selectable temperature unit (℃)
• Electrode condition indicator
• mV of pH measurement for electrode check
• HI-12973 dedicated pH/ORP with integral temperature sensor
• Probe quick connect system
• Battery life indication and low battery detection
• Keystroke confirmation tone
• Auto-off function
• Waterproof casing IP67

• Repeatable/Efficient - the instrument's auto stable feature will hold stable measurements on the display, resulting in precise, repeatable, and error-free measurements.
• Convenient/Reliable - simple calibration with automatic buffer recognition.
• Calibration is stored in memory and the electrode efficiency can be viewed at any time.
• Measures pH, ORP (mV) and temperature
• Simple 1, 2, or 3 point calibration
• Large, high contrast, LCD display; displays pH/mV and temperature simultaneously
• AUTOLOCK mode holds stable measurements on the display
• Accepts U.S. (7.00, 4.01, 10.01) or NIST (6.86, 4.00, 9.18) buffer sets
• Automatic/manual temperature compensation*
• Automatic lock mode and end point sensing feature will lock in stable measurements
• BNC input allows for any pH or ORP electrode with BNC to be connected*
• 1 year warranty on instrument

Spear-type pH combination electrode for penetration measurements in meat, fruit and cheese, with fixed cable and waterproofed DIN plug.

Buy together with XYL-WTW-903843 to use as a puncture knife pH probe.

• Intuitive touchscreen operation
• Efficient workflow support
• Security and compliance - 21 CFR part 11 support, GLP and Password protection
• Memory size: 250 analyses (20.000 data points)
• Data Transfer by PC, Printer or USB stick
• Probes not included

• Application-specific electrode
• Automatic temperature compensation (ATC)
• Stability indicator for accurate data recording
• Battery-powered
• DIN connection
• Simultaneous pH and temperature measurements on a large dual-line LCD display
• User-friendly two-button design
• Application-specific probe
• Durable IP67 waterproof casing
• Watertight probe connection
• Probe condition indicator
• Automatic pH calibration at one or two points within two memorized buffer sets (standard or NIST)
• On-screen calibration tags
• mV of pH measurement for electrode check
• Selectable temperature unit (℃ or ∞F)
• Auto-off function
• Battery life indication and low battery detection

• Simple menu
• T-pad
• ISM® ready
• IP67 - weatherproof and robust design
• 12 languages
• Sunlight-proof
• StatusLight™
• Weatherproof USB

• Simultaneous pH, ORP and temperature measurements on a large three-line LCD display
• Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
• User-friendly two-button design
• Selectable temperature unit (℃)
• Electrode condition indicator
• mV of pH measurement for electrode check
• HI-12973 dedicated pH/ORP with integral temperature sensor
• Probe quick connect system
• Battery life indication and low battery detection
• Keystroke confirmation tone
• Auto-off function
• Waterproof casing IP67

• Simple menu
• ISM® Compatible
• uFocus™
• T-pad
• Endpoint signalling
• IP67 - (weatherproof)
• Outdoor mode (maximises battery life)
• Sunlight-proof

Puncture knife, made of stainless steel, for pH measurement of meat, cheese, fruits with a pH electrode model SenTix™ Sp or SenTix Sp-T 900, robust blade with adapted cut-out.

Buy together with XYL-WTW-103730 to use as a puncture knife pH probe.