ETI 8100 Plus pH meter is a three-in-one instrument that features a large easy to read, LCD display. It reads pH over the range of -2 to 16 pH with a resolution of 0.01 pH, mV over the range of -1000 to 1000 mV and temperature over the range of -39.9 to 149.9℃ with a resolution of 0.1℃

• Robust waterproof case gives IP66/67 protection
• Manual/automatic temperature compensation
• Simple pH re-calibration
• 2 year guarantee
• Polygiene BioMaster product protection

The 8100 Plus pH meter is available as a meter only or as a complete kit which includes:

• 1x 8100 Plus pH meter
• 1x Temperature probe
• 1x General purpose pH electrode
• 1x 4.01 pH buffer solution
• 1x 7.00 pH buffer solution
• 1x Carrying case

• Clogging Prevention System (CPS™)
• Automatic Temperature Compensation (ATC)
• Two-point calibration
• Battery Error Prevention System (BEPS) - alerts the user of low battery power that could adversely affect readings
• Simultaneous pH and temperature measurements on a large dual-line LCD display
• User-friendly two-button design
• Application-specific probe
• Durable IP67 waterproof casing
• Watertight probe connection
• Probe condition indicator
• Automatic pH calibration at one or two points within two memorized buffer sets (standard or NIST)
• On-screen calibration tags
• mV of pH measurement for electrode check
• Selectable temperature unit (℃ or ∞F)
• Auto-off function
• Battery life indication and low battery detection

• Large double line LCD display with backlight
• Display closer to the surface of tester for a better viewing angle
• Simultaneous display of measurement and temperature
• Easy-to-operate user interface with the addition of the MENU key
• 1 push calibration cap: Leakproof
• Fill-line indicator for measurement
• Wider, stable base to stand the tester upright

• Recommended operating temperature: -5 to 70℃
• pH range: pH: 0 to 12
• Glass body material
• Supplied with BNC connector
• Supplied with 1m cable
• Suitable for pH measurement

• Easy to use
• Non-volatile memory
• Large, upright LCD
• Click-lock battery compartment
• Easy push-button calibration
• Transparent protective cap
• ±0.1 % accuracy across full pH range
• Auto-buffer recognition
• Auto-calibration functions
• Long-lasting sensor

• Intuitive touchscreen operation
• Efficient workflow support
• Security and compliance - 21 CFR part 11 support, GLP and Password protection
• Memory size: 250 analyses (20.000 data points)
• Data Transfer by PC, Printer or USB stick
• Probes not included

Puncture knife, made of stainless steel, for pH measurement of meat, cheese, fruits with a pH electrode model SenTix™ Sp or SenTix Sp-T 900, robust blade with adapted cut-out.

Buy together with XYL-WTW-103730 to use as a puncture knife pH probe.

• User-friendly two-button design
• Application-specific probe
• Durable IP67 waterproof casing
• Watertight probe connection
• Probe condition indicator

• HORIBA's highly-sensitive, flat sensor technology opens up new possibilities for sampling and sample types. Only a small amount of sample is required, so you can easily sample in situ without the need for beakers or other labware.
• Sensors are easily replaced as required.
• Measure even smaller samples with the LAQUAtwin sampling sheet.
• The sampling sheet allows trace volumes to be analysed. For example, you can even measure the pH of human skin by wiping with a sampling sheet soaked in pure water, and placing it on the sensor.
• Using the HORIBA sampling sheet, volumes down to 0.05 ml can be tested (except for conductivity measurements).
• Carry case comes as standard for handy portability.
• The compact carry case contains everything you need for your measurements, including the standard solution and sampling sheets.
• LAQUAtwin is IP67 rated.

Key Features:

• capacitive touch keypad
• large 140mm LCD display with clear full text readout
• digital smart electrode enables Edge to automatically recognise and store sensor type, ID and calibration information
• range: -2.00 to 16.00pH and -2.000 to 16.000pH
• resolution: 0.01pH and 0.001pH
• accuracy: +/- 0.01pH and +/- 0.002pH
• slim, lightweight design means Edge can be hand-held, wall-mounted or used as a bench meter

• pH measuring range 0 to 14
• Safely measured values due to signal processing in the sensor
• Easy electrode replacement thanks to calibration data stored inside sensor
• Sensor quality monitoring by QSC function
• IDS pH microelectrode
• For measurement of small volumes and in small vessels
• Diameter 5mm
• QSC function
• Integrated temperature sensor
• Memory for 10 calibrations

• Easy to use
• Non-volatile memory
• Large, upright LCD
• Click-lock battery compartment
• Easy push-button calibration
• Transparent protective cap
• ±0.1 % accuracy across full pH range
• Auto-buffer recognition
• Auto-calibration functions
• Long-lasting sensor

Replacement Gel probe for pH1000A meter

• Simple menu
• ISM® Compatible
• uFocus™
• T-pad
• Endpoint signalling
• IP67 - (weatherproof)
• Outdoor mode (maximises battery life)
• Sunlight-proof

ETI 8100 pH and temperature meter features an easy to read, LCD display and is supplied as a kit. The meter indicates pH over the range of 0 to 14 pH with a resolution of 0.01 pH and temperature over the range of 0 to 99.9℃ with a resolution of 0.1℃.

Kit includes:

• pH electrode and temperature probe included
• Automatic calibration for hassle-free accuracy
• Automatic temperature compensation for added precision
• Accuracy: ±0.05 pH
• Temperature range: 0 to 99 °C
• Dual measurement kit

• Large double line LCD display with backlight
• Display closer to the surface of tester for a better viewing angle
• Simultaneous display of measurement and temperature
• Easy-to-operate user interface with the addition of the MENU key
• 1 push calibration cap
• Leakproof
• Fill-line indicator for measurement
• Wider, stable base to stand the tester upright