• Easy to use
• Non-volatile memory
• Large, upright LCD
• Click-lock battery compartment
• Easy push-button calibration
• Transparent protective cap
• ±0.1 % accuracy across full pH range
• Auto-buffer recognition
• Auto-calibration functions
• Long-lasting sensor

• Waterproof
• Automatic or manual temperature compensation
• Calibration
• 200 hour battery life approximately with 1.5V AA batteries (x4)
• Clear display
• Auto hold
• Calibration timeout
• PC Connectivity via USB
• GLP
• Intuitive keypad
• Carry case and accessories

• Large double line LCD display with backlight
• Display closer to the surface of tester for a better viewing angle
• Simultaneous display of measurement and temperature
• Easy-to-operate user interface with the addition of the MENU key
• 1 push calibration cap: Leakproof
• Fill-line indicator for measurement
• Wider, stable base to stand the tester upright

• Simultaneous pH, ORP and temperature measurements on a large three-line LCD display
• Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
• User-friendly two-button design
• Selectable temperature unit (℃)
• Electrode condition indicator
• mV of pH measurement for electrode check
• HI-12973 dedicated pH/ORP with integral temperature sensor
• Probe quick connect system
• Battery life indication and low battery detection
• Keystroke confirmation tone
• Auto-off function
• Waterproof casing IP67

• Simple menu
• ISM® Compatible
• uFocus™
• T-pad
• Endpoint signalling
• IP67 - (weatherproof)
• Outdoor mode (maximises battery life)
• Sunlight-proof

• Waterproof
• Automatic or manual temperature compensation
• Calibration
• 200 hour battery life approximately with 1.5V AA batteries (x4)
• Clear display
• Auto hold
• Calibration
• PC Connectivity via USB
• GLP
• Intuitive keypad
• Carry case and accessories

HI-97745 is an advanced portable photometer for the measurement of free and total chlorine, total hardness, iron – low res, and pH in water.

•  pH
•  Chlorine
•  Iron
•  Hardness

Ranges: Magnesium Hardness 0.00 to 2.00 mg/L (as CaCO3); Calcium Hardness 0.00 to 2.70 mg/L (as 3); Total Hardness 0.00 to 4.70 mg/L (as 3); pH6.5 to 8.5 pH.

This meter offers a superior optical system that utilises a reference detector and narrow band interference filters for extremely fast and repeatable measurements.

• No warm up time before taking a measurement
• Tutorial mode for step-by-step instructions
• Uses either powder or cost saving liquid reagents
• Each photometer is delivered in a cardboard box and is supplied with:

• Repeatable/Efficient - the instrument's auto stable feature will hold stable measurements on the display, resulting in precise, repeatable, and error-free measurements.
• Convenient/Reliable - simple calibration with automatic buffer recognition.
• Calibration is stored in memory and the electrode efficiency can be viewed at any time.
• Measures pH, ORP (mV) and temperature
• Simple 1, 2, or 3 point calibration
• Large, high contrast, LCD display; displays pH/mV and temperature simultaneously
• AUTOLOCK mode holds stable measurements on the display
• Accepts U.S. (7.00, 4.01, 10.01) or NIST (6.86, 4.00, 9.18) buffer sets
• Automatic/manual temperature compensation*
• Automatic lock mode and end point sensing feature will lock in stable measurements
• BNC input allows for any pH or ORP electrode with BNC to be connected*
• 1 year warranty on instrument

• Automatic pH calibration - up to 5 points (NIST, USA pH buffers) / up to 6 points (DIN pH buffers)  
• 0.01 pH resolution
• Offset and average slope display 
• Automatic / manual temperature compensation and temperature calibration function
• ORP calibration option
• °C & °F temperature readings
• Auto log data; built-in memory can store up to 500 data
• Auto shut-off (programmable: up to 30 minutes)
• Auto stable, auto hold, and real time measurement modes
• Calibration alarm (programmable: up to 90 days)
• Built-in electrode holder allows 2 electrodes to be attached
• Monochrome LCD with white LED backlight: 50 x 50 mm
• Casing is IP67 waterproof/dustproof, shock & scratch resistant, non-slip
• Powered by 2 x AA batteries
• Packaged with electrode and calibration solutions in carrying case
• 3 years meter warranty

• 8 hour battery life
• Dual USB ports
• 5.5 inch display
• 3.5 mm probe input
• Capacitive touch keypad
• HI-11310 digital glass body pH electrode with 3.5mm connector and 1m cable

• Simultaneous pH and temperature measurements on a large dual-line LCD display
• Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
• Selectable temperature unit (℃ or ∞F)
• Electrode condition indicator
• mV or pH measurement for electrode check
• HI-12923 dedicated pH probe with integrated temperature sensor
• Probe quick connect system
• Battery life indication and low battery detection
• Keystroke confirmation tone
• Auto-off function
• Waterproof casing IP67

For testing of waste water.

• Easy-to-operate, robust pH/mV-meter with large LCD-display, for mobile routine measurement.
• Meter in carry case with
• pH-sensor SenTix™ 41
• buffer solution STP 4 and STP 7
• stand, beaker
• short instruction manual
• CD-ROM and batteries
• Handy case sets for field applications
• The ProfiLine handhelds are available as single instruments in a case without measurement accessories, but also as sets supporting individual application requirements.
• The case also serves as a small field laboratory.

• User-friendly two-button design
• Application-specific probe
• Durable IP67 waterproof casing
• Watertight probe connection
• Probe condition indicator

• Large double line LCD display with backlight
• Display closer to the surface of tester for a better viewing angle
• Simultaneous display of measurement and temperature
• Easy-to-operate user interface with the addition of the MENU key
• 1 push calibration cap:
• Leakproof
• Fill-line indicator for measurement
• Wider, stable base to stand the tester upright

Key Features:

• capacitive touch keypad
• large 140mm LCD display with clear full text readout
• digital smart electrode enables Edge to automatically recognise and store sensor type, ID and calibration information
• range: -2.00 to 16.00pH and -2.000 to 16.000pH
• resolution: 0.01pH and 0.001pH
• accuracy: +/- 0.01pH and +/- 0.002pH
• slim, lightweight design means Edge can be hand-held, wall-mounted or used as a bench meter