Introducing the new Neogen® Petrifilm™ Plate Reader Advanced - the future of Food Safety Lab Automation. With automated plate enumeration and enhanced reporting capabilities, the Petrifilm Plate Reader Advanced counts colonies on Petrifilm Plates in 6 seconds or less.

• Works with 10 different Neogen® Petrifilm™ Plates including Rapid Aerobic, Rapid Coliform, Rapid E. coli/Coliform, Rapid Yeast and Mold, Enterobacteriaceae and Staph Express Count Plates (Complete list below)
• Enumeration in 6 seconds or less
• Reads up to 900 plates per hour
• Reads 10 barcode symbologies
• Easy to clean and maintain
• Compact instrument
• Assign product specifications and create a Petrifilm Plate worklist
• Accurate colony counting
• Store results and allow for trending and reporting
• Automated reports + data trending
• Remote access to the software via company intranet or VPN

Needles (10 pack)

• Portable and easy to use
• No external power required
• Allows economical infrared thermometer checking
• Aluminium cup 60 x 100mm with a solid matt black base
• Can be used at any ambient temperature over the range of 5 to 80℃

A deioniser suitable for general laboratory applications typically requiring up to 5L/day (Labwater 1) or up to 30L/day (Labwater 2) of deionised water. It is a wall mounted product that does not require mains electricity and indicates cartridge exhaustion by the use of colour change resin.

Available with optional coil and gun for accurate dispensing

• Ideal for intermittent use
• Typical output based on a supply containing 200mg/L of total dissolved solids:
• Labwater 1: 160L
• Labwater 2: 320L
• Supplied with 2 x D340 cartridges

The XD series instruments are ideal for routine and spectral analysis. As true all-rounders, the XD 7000 and XD 7500 facilitate work routines, especially with automatic method recognition using barcodes, automatic cell recognition and more than 170 pre-programmed methods. In addition to analytical quality control, they also support Good Labor Practice (GLP). The instruments are available together with bar-coded test tubes and a wide range of accessories from a single source - which is also easy on your wallet. High-quality reference beam optics, usability, easy handling and multilingual global applicability round off the versatility of the VIS and UV/VIS spectrophotometers, which are also equipped for flexible on-site use.

• Premium optical system with reference beam
• Automatic test recognition with internal barcode reader
• Automatic cuvette type detection
• Support of analytical quality assurance

Applications

Boiler Water, Cooling Water, Disinfection Control, Drinking Water Treatment, Food and Beverage, Galvanization,  Others: Pool Water Control, Raw Water Treatment, Waste Water Treatment

• Available capacities: 12,000g - 35,000g
• Available readability: 0.1g
• 377 mm x 311 mm platform size
• 5.7" colour VGA touch screen
• Two sensors on display offer hands-free operation
• The display can be separated from the base up to 1.5m
• 2-D shock protection and IP54 base enclosure protect the balance from damage
• GLP/GMP data output with real-time clock
• Programmable IR sensors
• Weighing Units: Milligram, Gram, Kilogram, Custom