• Replacement sensor for LAQUAtwin B-771, EC-11, EC-22, and EC-33
• Requires a minimum of 0.12 ml sample
• Corrosion-resistant titanium / platinum black cell material
• Waterproof

• Replacement sensor for LAQUAtwin B-722 and Na-11
• Requires a minimum of 0.3 ml sample with direct measurement (0.05 ml with sampling sheet B) 
• Sensor guard has a sliding cap for scooping water sample
• Waterproof

• Easy to use
• Wireless
• Full flexibility
• Includes rechargeable LiPo-battery
• Splash water protected (IP43)
• Measuring pH, ORP, oxygen, conductivity, turbidity

• pH measuring range 0 to 14
• Safely measured values due to signal processing in the sensor
• Easy electrode replacement thanks to calibration data stored inside sensor
• Sensor quality monitoring by QSC function
• IDS pH microelectrode
• For measurement of small volumes and in small vessels
• Diameter 5mm
• QSC function
• Integrated temperature sensor
• Memory for 10 calibrations

• Replacement sensor for LAQUAtwin B-751 and Ca-11
• Requires a minimum of 0.3 ml sample with direct measurement (0.05 ml with sampling sheet B)
• Sensor guard has a sliding cap for scooping water sample
• Waterproof

• pH measuring range 0 to 14
• Gel electrolyte
• Plastic shaft
• Integrated temperature sensor
• Safely measured values due to signal processing in the sensor
• Easy electrode replacement thanks to calibration data stored inside sensor
• Sensor quality monitoring by QSC function
• Memory for 10 calibration records
• QSC function

Calibration Kit Set for TN100IR (0.02, 20.0, 100, 800 NTU), 4x60mL

• Easy to use
• Wireless
• Full complete wireless module kit available

• Y048 Sampling Sheet Holder
• If tiny particles are contained in a sample (e.g., soil extract), the particles influence measurement results. Please use sampling sheet B together with sampling sheet holder.
• For LAQUAtwin pocket meters, except conductivity and salt EC models

• Easy to use
• Wireless
• Connects to MultiLine® 3310/3510/36x0 IDS
• Connects to inoLab® Multi IDS
• Connects to MonoLine
• Full complete wireless module kit available

• pH measuring range 0 to 14
• IDS pH combination electrode with gel electrolyte, plastic shaft and integrated temperature sensor
• Safely measured values due to signal processing in the sensor
• Easy electrode replacement thanks to calibration data stored inside sensor
• Sensor quality monitoring by QSC function

• 1.5 m in length
• Other lengths available
• Waterproof connection between plug and meter (IP67)
• Pressure resistant connection between sensor and cable plug (IP 68, 10 bar)
• Tearproof design

• Y046 Sampling Sheet B
• Contains 100 pcs. / box
• Use for minute samples (minimum of 0.05 ml) and particulate-containing samples (e.g., soil extract). For the latter, please use sampling sheet holder and cover the sensor during measurement.
• For LAQUAtwin and Twin pocket meters, except conductivity and salt EC models

Spear-type pH combination electrode for penetration measurements in meat, fruit and cheese, with fixed cable and waterproofed DIN plug.

Buy together with XYL-WTW-903843 to use as a puncture knife pH probe.

• Replacement sensor for LAQUAtwin B-721 and Salt-22
• Requires a minimum of 0.3 ml sample with direct measurement (0.05 ml sample with sampling sheet B)
• Sensor guard has a sliding cap for scooping water sample
• Waterproof

• Easy to use
• Wireless-ready meters
• Charger suitable for wall mounting
• Smart meter module