Incubators

Takes Microbiology out of the Laboratory - Designed for field professionals who needs to

• Incubate 8 – 10 Dip-slides on site
• Or on the move – Mains & 12 as standard distribution without any fans or moving parts, only 1.2Kg in total weight!

The Discovery MX10 is specifically designed for Dip-slides (but is easily capable of a several 100mm Petri-dishes) and applications both on site and in a vehicle, the efficient design helps minimise drain on the vehicle battery and the robust ABS case is ideal for a life out in the field. The MX10 is supplied ready for mains or 12 uses as standard and features our world standard plug & power adaptor - all ready to go! Our tested MX solid state temperature control technology and heat reservoir chassis guarantee superb heat 

QB-E5 - For 12 x 5.0ml microtube, 53.5mm hole depth, dia. 16.7mm for use with Grant QBD or QBH dry heaters

QB-DN - For 24 x 5.0ml microtube, 53.5mm hole depth, dia. 16.7mm for use with Grant QBD or QBH dry heaters

QB-E2 - For 24 x 2.0ml microtube, 35mm hole depth, dia. 11mm for use with Grant QBD or QBH dry heaters

QB-E1 - For 24 x 1.5ml microtube, 35mm hole depth, dia. 10.8mm for use with Grant QBD or QBH dry heaters

QB-E0 - For 24 x 0.5ml microtube, 30mm hole depth, dia. 8mm for use with Grant QBD or QBH dry heaters

QB-H - For 56 x 0.2ml microtube, 14mm hole depth, dia. 6.5mm for use with Grant QBD or QBH dry heaters

QB-24 - For 5 x dia. 24mm test tubes and universal bottles, 50mm hole depth for use with Grant QBD or QBH dry heaters

QB-18 - For 12x18mm (dia.) test tubes, 50mm hole depth for use with Grant QBD or QBH dry heaters

QB-16 - For 12 x dia. 16mm test tubes, 50mm hole depth for use with Grant QBD or QBH dry heaters

QB-13 - For 12 x dia. 13mm test tubes, 50mm hole depth for use with Grant QBD or QBH dry heaters

QB-12 - For 24 x dia. 12mm test tubes, 50mm hole depth for use with Grant QBD or QBH dry heaters

QB-10 - For 24 x dia. 10mm test tubes, 50mm hole depth for use with Grant QBD or QBH dry heaters

QB-17H - For 10 x Falcon tubes tall 17mm dia. test tubes, 75mm hole depth for use with Grant QBD or QBH dry heaters

Kit includes:

• Stainless steel RTD PT100 probe
• 45.7 cm stainless steel support rod
• Thermometer/temperature probe extension clamp
• Hook connector

Interchangeable block for 18 x √Éò 12mm tubes, round bottom, depth 58mm for use with Grant CH3-155

Interchangeable block for 6 x 25mm tubes, depth 40mm for use with Grant CH3-154

Interchangeable block for 5 x √Éò 29mm tubes, flat bottom, depth 40mm for use with Grant CH3-153

Interchangeable block for 10 x 16mm tubes, depth 56mm for use with Grant CH3-152

Interchangeable block for 10 x √Éò 13mm tubes, flat bottom, depth 30mm for use with Grant CH3-151

Interchangeable block for 2 x 48mm tubes, depth 58mm for use with Grant CH3-150

• Typical load capacity of up to 25 dip-slides or 30 Petri-dishes (95mm)
• Robustly designed to work in the most hostile working environments
• +5 to 45℃ +/- 0.5℃ ambient temperature range
• Chamber Size: 18cm x 18cm x 15cm
• Supplied full universal plug options for the UK, Europe, America & Australia
• Optional in-vehicle power adapter available
• 37℃ Quickset point for easy initial set up

• Available number of blocks: 1, 2, 4, 6
• Blocks are easy to use, no tools required
• Dual-adjustment knobs with dial markings
• Temperature Range: High 75 to 150∞C; Low Ambient + 5 to 100∞C
• Stability: ± 2.5∞C
• Uniformity: ± 0.4∞C†at 37∞C
• Working Environment: 18∞C to 33∞C, 20% to 80%RH, non-condensing

• Available number of blocks: 1, 2, 4, 6
• Blocks are easy to use, no tools required
• Digital LED display
• Temperature Range: Ambient + 5 to 120∞C
• Stability: ± 0.2 to 0.5∞C
• Uniformity: ± 0.2∞C†at 37∞C
• Working Environment: 18 to 33∞C, 20% to 80%RH, non-condensing
• Applications: Incubation & Activation of Cultures, Enzyme Reactions, Immunoassays, Melting/Boiling Points, Isothermal Incubations, Nucleic Acid Denaturation

• Capacities from 10 litres to 355 Litres
• Temperature range from  where ambient +10℃ to 100℃
• Fluctuation typically ±0.75℃
• Hydraulic dial thermostat
• Aluminium clad steel or stainless steel chamber
• Adjustable shelves
• Calibrated dial thermostat
• Independent overheat safety
• CE compliant
• Shipping cost - dependant on product size and delivery location - Speak to our team to enquire.

• Temperature range ambient +5ºC to 130ºC, with rapid heat-up time
• Stability: ±0.1ºC
• Uniformity: ±0.1ºC
• Digital temperature control for optimal precision
• Range of convenient features including alarms, single and dual point calibration, programmed start/stop, ‘offset' for known sample temperature variation and choice of external or internal probes
• Includes block removal tool for easy and safe removal of blocks.

• Digital temperature control for optimum precision
• Heating range ambient +5ºC to 100ºC
• Powerful heater for rapid heat-up times – 25ºC to 100ºC in just 15 minutes, 25ºC to 37ºC in just 4 minutes
• Stability ± 0.1ºC, uniformity ± 0.2℃
• Heating block holds combinations of four microtube sizes simultaneously – up to a total of 49 tubes: 24 x 1.5/2.0 ml, 15 x 0.5 ml, 10 x 0.2 ml
• Flexible tube sizes and rapid heat-up time enables swift change of application
• Convenient integral timer for time-sensitive incubations
• Sturdy, durable, easy-to-clean plastic construction; compact design with small footprint
• 2-line display for simple and precise setting of temperature/time and for monitoring current status during operation

• Temperature range ambient +5ºC to 130ºC, with rapid heat-up time
• Stability: ±0.1ºC
• Uniformity: ±0.1ºC
• Digital temperature control for optimal precision
• Range of convenient features including alarms, single and dual point calibration, programmed start/stop, ‘offset' for known sample temperature variation and choice of external or internal probes
• Includes block removal tool for easy and safe removal of blocks.

• Temperature range ambient +5ºC to 200ºC, with rapid heat-up time
• Stability: ±0.1ºC
• Uniformity: ±0.1ºC
• Digital temperature control for optimal precision
• Range of convenient features including alarms, single and dual point calibration, programmed start/stop, ‘offset' for known sample temperature variation and choice of external or internal probes
• Includes block removal tool for easy and safe removal of blocks.

The new products in the Solid.Line impress with their tried-and-tested BINDER quality and reliability. They are suited to incubation. The attributes of the Solid.Line are geared towards the application in question and therefore used in research and quality assurance.

• 23 litre capacity
• Temperature range: 30℃ to 70℃
• Hydro-mechanical thermostat
• Inner door made of tempered safety glass
• 2 chrome-plated racks
• stackable

• Temperature range ambient +5ºC to 130ºC, with rapid heat-up time
• Stability: ±0.1ºC
• Uniformity: ±0.1ºC
• Digital temperature control for optimal precision
• Range of convenient features including alarms, single and dual point calibration, programmed start/stop, ‘offset' for known sample temperature variation and choice of external or internal probes
• Includes block removal tool for easy and safe removal of blocks.

• Cooling/heating setting range from – 10ºC to 100℃, with very rapid cool down and heat-up times
• Stability ± 0.1℃, uniformity ±0.25℃ at 37℃
• Convenient integral reaction timer with audible alarm
• Dry temperature control system maintains a clean and vibration-free working environment
• A 2-line LCD display clearly indicates both set and actual values for temperature and time. Works in combination with simple push buttons for easy set-up.
• Flexible tube sizes and rapid heat-up/cool-down times enables swift change of application

• Cooling/heating setting range from – 10ºC to 100℃, with very rapid cool down and heat-up times
• Stability ± 0.1℃, uniformity ±0.25℃ at 37℃
• Convenient integral reaction timer with audible alarm
• Dry temperature control system maintains a clean and vibration-free working environment
• A 2-line LCD display clearly indicates both set and actual values for temperature and time. Works in combination with simple push buttons for easy set-up.
• Flexible tube sizes and rapid heat-up/cool-down times enables swift change of application

• Cooling/heating setting range from – 10ºC to 100℃, with very rapid cool down and heat-up times
• Stability ± 0.1℃, uniformity ±0.25℃ at 37℃
• Convenient integral reaction timer with audible alarm
• Dry temperature control system maintains a clean and vibration-free working environment
• A 2-line LCD display clearly indicates both set and actual values for temperature and time. Works in combination with simple push buttons for easy set-up.
• Flexible tube sizes and rapid heat-up/cool-down times enables swift change of application

• Available volumes: 6litres - 100litres
• Available fan options: with fan or without fan
• Fan included
• 2 shelves
• 3 shelf positions
• Incoloy sheathed elements
• Fluctuation +/- 0.25∫C @ 37∫C
• Easy clean powder coated body
• Aluminium coated mild steel chamber
• Independent overheat thermostat
• CLAD interior with thermostatic control
• Analogue controls

• Available volumes: 6litres - 100litres
• Available fan options: with fan or without fan
• Fan included
• 3 shelves
• 4 shelf positions
• Incoloy sheathed elements
• Fluctuation +/- 0.25∫C @ 37∫C
• Stainless steel chamber
• Independent overheat thermostat
• Analogue controls

The BINDER incubator of the BD series with natural convection is the specialist in long-term and stable continuous operation. This incubator is specially designed for gentle incubation of organisms, as well as conditioning of heat-sensitive media or microbiological heating.

• Stability: ±0.1ºC
• Independently regulated heating and cooling blocks in the same unit
• Digital timer with sound alarm: 1 min to 99 h 59 min (increment 1 min)
• User-adjustable programmes (temperature and time): 16 (heating) + 16 (cooling)
• Digital temperature control for optimum precision
• Temperature Calibration Function
• Protective lid

The BINDER incubator of the BF Avantgarde.Line series with forced convection is suitable for all gentle incubation applications, particularly under a full load and large batch throughputs. This incubator is extremely homogeneous and has quick recovery times.

Nickel Electro NE8 15 litre series incubators, for gravity convection and variable fan speed for forced air circulation. Designed to be efficient, safe and easy to use with a stainless steel chamber.

Dial controls for air flap and fan speed settings, bold illuminated LED temperature display offering precise time and temperature control from ambient +5_ to 100_. The incubator can run at a set temperature immediately, use run back timer or delay start feature. Energy-efficient in mind. Levelling feet adjustable on each corner. Stackable.  

Nickel Electro NE8 32 litre series incubators, for gravity convection and variable fan speed for forced air circulation. Designed to be efficient, safe and easy to use with a stainless steel chamber.

Dial controls for air flap and fan speed settings, bold illuminated LED temperature display offering precise time and temperature control from ambient +5_ to 100_. The incubator can run at a set temperature immediately, use run back timer or delay start feature. Energy-efficient in mind. Levelling feet adjustable on each corner. Stackable.  

Nickel Electro NE8 56 litre series incubators, for gravity convection and variable fan speed for forced air circulation. Designed to be efficient, safe and easy to use with a stainless steel chamber.

Dial controls for air flap and fan speed settings, bold illuminated LED temperature display offering precise time and temperature control from ambient +5_ to 100_. The incubator can run at a set temperature immediately, use run back timer or delay start feature. Energy-efficient in mind. Levelling feet adjustable on each corner. Stackable.  

A BINDER material test chamber with mechanical convection of the FP series provides reliably short drying times and particularly fast heating Ð even for chambers under full loads.

Nickel Electro NE8 112 litre series incubators, for gravity convection and variable fan speed for forced air circulation. Designed to be efficient, safe and easy to use with a stainless steel chamber.

Dial controls for air flap and fan speed settings, bold illuminated LED temperature display offering precise time and temperature control from ambient +5_ to 100_. The incubator can run at a set temperature immediately, use run back timer or delay start feature. Energy-efficient in mind. Levelling feet adjustable on each corner. Stackable.  

The KT series combines outstanding performance with impressive energy efficiency and environmental friendliness. The cooled incubators of the KT series are state-of-the-art in application and protect the samples.

LMS by Dulas Life Sciences Series 1A cooled incubators offer optimum temperature control from -10 to +50°C with an average variation of 0.5°C and fluctuation of 0.1°C. LMS has been producing scientific incubation products since 1979. Now renowned for their quality and longevity, their cooled incubators are used all over the world for a range of bio-scientific needs - from tissue and fruit fly cultures, to enzyme testing and seed storage. All equipment is manufactured in their own UK factory.

Options include:

Standard single set point control

Automatic dual temperature control for day-night environments

Fully programmable controller

Door lock preventing unauthorised access

Fan assisted air circulation keeping temperatures consistent

Wire shelves for optimum airflow

Powder coated white mild steel exterior with white pre-coated aluminium interior

Hermetically sealed refrigeration system air-tight to avoid controlled temperature loss

Automatic defrost, with a manual override option built in

Self-evaporating condensate drip-tray eliminating the pooling of moisture

Fruit fly modification prevents corrosion caused by fruit fly

RJ 45 interface for remote access (wired) - user friendly control enables performance visibility and parameter changes

Full P.I.D. heating/cooling control optimising power usage when needed

Pre-set 70°C safety cutout safeguarding from overheating

Electronics RF and TV suppressed voltage surge protection

Access porthole for additional temperature probes

Full range of optional extras are also available to suit your requirements - please enquire for details

The powerful virtuoso in cooling incubators for microorganisms: the KB masters temperature ranges from -10℃ to 100℃. The new KB series consumes up to 30% less energy compared to its predecessor. With its extensive programming options and homogenous incubation conditions even when fully loaded, this cooling incubator covers a wide range of applications.

LMS by Dulas Life Sciences Series 1A cooled incubators offer optimum temperature control from -10 to +50°C with an average variation of 0.5°C and fluctuation of 0.1°C. LMS has been producing scientific incubation products since 1979. Now renowned for their quality and longevity, their cooled incubators are used all over the world for a range of bio-scientific needs - from tissue and fruit fly cultures, to enzyme testing and seed storage. All equipment is manufactured in their own UK factory.

Options include:

Standard single set point control

Automatic dual temperature control for day-night environments

Fully programmable controller

Door lock preventing unauthorised access

Fan assisted air circulation keeping temperatures consistent

Wire shelves for optimum airflow

Powder coated white mild steel exterior with white pre-coated aluminium interior

Hermetically sealed refrigeration system air-tight to avoid controlled temperature loss

Automatic defrost, with a manual override option built in

Self-evaporating condensate drip-tray eliminating the pooling of moisture

Fruit fly modification prevents corrosion caused by fruit fly

RJ 45 interface for remote access (wired) - user friendly control enables performance visibility and parameter changes

Full P.I.D. heating/cooling control optimising power usage when needed

Pre-set 70°C safety cutout safeguarding from overheating

Electronics RF and TV suppressed voltage surge protection

Access porthole for additional temperature probes

Full range of optional extras are also available to suit your requirements - please enquire for details

LMS by Dulas Life Sciences Series 1A cooled incubators offer optimum temperature control from -10 to +50°C with an average variation of 0.5°C and fluctuation of 0.1°C. LMS has been producing scientific incubation products since 1979. Now renowned for their quality and longevity, their cooled incubators are used all over the world for a range of bio-scientific needs - from tissue and fruit fly cultures, to enzyme testing and seed storage. All equipment is manufactured in their own UK factory.

Options include:

Standard single set point control

Automatic dual temperature control for day-night environments

Fully programmable controller

Door lock preventing unauthorised access

Fan assisted air circulation keeping temperatures consistent

Wire shelves for optimum airflow

Powder coated white mild steel exterior with white pre-coated aluminium interior

Hermetically sealed refrigeration system air-tight to avoid controlled temperature loss

Automatic defrost, with a manual override option built in

Self-evaporating condensate drip-tray eliminating the pooling of moisture

Fruit fly modification prevents corrosion caused by fruit fly

RJ 45 interface for remote access (wired) - user friendly control enables performance visibility and parameter changes

Full P.I.D. heating/cooling control optimising power usage when needed

Pre-set 70°C safety cutout safeguarding from overheating

Electronics RF and TV suppressed voltage surge protection

Access porthole for additional temperature probes

Full range of optional extras are also available to suit your requirements - please enquire for details

LMS by Dulas Life Sciences Series 1A cooled incubators offer optimum temperature control from -10 to +50°C with an average variation of 0.5°C and fluctuation of 0.1°C. LMS has been producing scientific incubation products since 1979. Now renowned for their quality and longevity, their cooled incubators are used all over the world for a range of bio-scientific needs - from tissue and fruit fly cultures, to enzyme testing and seed storage. All equipment is manufactured in their own UK factory.

Options include:

Standard single set point control

Automatic dual temperature control for day-night environments

Fully programmable controller

Door lock preventing unauthorised access

Fan assisted air circulation keeping temperatures consistent

Wire shelves for optimum airflow

Powder coated white mild steel exterior with white pre-coated aluminium interior

Hermetically sealed refrigeration system air-tight to avoid controlled temperature loss

Automatic defrost, with a manual override option built in

Self-evaporating condensate drip-tray eliminating the pooling of moisture

Fruit fly modification prevents corrosion caused by fruit fly

RJ 45 interface for remote access (wired) - user friendly control enables performance visibility and parameter changes

Full P.I.D. heating/cooling control optimising power usage when needed

Pre-set 70°C safety cutout safeguarding from overheating

Electronics RF and TV suppressed voltage surge protection

Access porthole for additional temperature probes

Full range of optional extras are also available to suit your requirements - please enquire for details

LMS by Dulas Life Sciences Series 1A cooled incubators offer optimum temperature control from -10 to +50°C with an average variation of 0.5°C and fluctuation of 0.1°C. LMS has been producing scientific incubation products since 1979. Now renowned for their quality and longevity, their cooled incubators are used all over the world for a range of bio-scientific needs - from tissue and fruit fly cultures, to enzyme testing and seed storage. All equipment is manufactured in their own UK factory.

Options include:

Standard single set point control

Automatic dual temperature control for day-night environments

Fully programmable controller

Door lock preventing unauthorised access

Fan assisted air circulation keeping temperatures consistent

Wire shelves for optimum airflow

Powder coated white mild steel exterior with white pre-coated aluminium interior

Hermetically sealed refrigeration system air-tight to avoid controlled temperature loss

Automatic defrost, with a manual override option built in

Self-evaporating condensate drip-tray eliminating the pooling of moisture

Fruit fly modification prevents corrosion caused by fruit fly

RJ 45 interface for remote access (wired) - user friendly control enables performance visibility and parameter changes

Full P.I.D. heating/cooling control optimising power usage when needed

Pre-set 70°C safety cutout safeguarding from overheating

Electronics RF and TV suppressed voltage surge protection

Access porthole for additional temperature probes

Full range of optional extras are also available to suit your requirements - please enquire for details

LMS by Dulas Life Sciences Series 1A cooled incubators offer optimum temperature control from -10 to +50°C with an average variation of 0.5°C and fluctuation of 0.1°C. LMS has been producing scientific incubation products since 1979. Now renowned for their quality and longevity, their cooled incubators are used all over the world for a range of bio-scientific needs - from tissue and fruit fly cultures, to enzyme testing and seed storage. All equipment is manufactured in their own UK factory.

Options include:

Standard single set point control

Automatic dual temperature control for day-night environments

Fully programmable controller

Door lock preventing unauthorised access

Fan assisted air circulation keeping temperatures consistent

Wire shelves for optimum airflow

Powder coated white mild steel exterior with white pre-coated aluminium interior

Hermetically sealed refrigeration system air-tight to avoid controlled temperature loss

Automatic defrost, with a manual override option built in

Self-evaporating condensate drip-tray eliminating the pooling of moisture

Fruit fly modification prevents corrosion caused by fruit fly

RJ 45 interface for remote access (wired) - user friendly control enables performance visibility and parameter changes

Full P.I.D. heating/cooling control optimising power usage when needed

Pre-set 70°C safety cutout safeguarding from overheating

Electronics RF and TV suppressed voltage surge protection

Access porthole for additional temperature probes

Full range of optional extras are also available to suit your requirements - please enquire for details

LMS by Dulas Life Sciences Series 1A cooled incubators offer optimum temperature control from -10 to +50°C with an average variation of 0.5°C and fluctuation of 0.1°C. LMS has been producing scientific incubation products since 1979. Now renowned for their quality and longevity, their cooled incubators are used all over the world for a range of bio-scientific needs - from tissue and fruit fly cultures, to enzyme testing and seed storage. All equipment is manufactured in their own UK factory.

Options include:

Standard single set point control

Automatic dual temperature control for day-night environments

Fully programmable controller

Door lock preventing unauthorised access

Fan assisted air circulation keeping temperatures consistent

Wire shelves for optimum airflow

Powder coated white mild steel exterior with white pre-coated aluminium interior

Hermetically sealed refrigeration system air-tight to avoid controlled temperature loss

Automatic defrost, with a manual override option built in

Self-evaporating condensate drip-tray eliminating the pooling of moisture

Fruit fly modification prevents corrosion caused by fruit fly

RJ 45 interface for remote access (wired) - user friendly control enables performance visibility and parameter changes

Full P.I.D. heating/cooling control optimising power usage when needed

Pre-set 70°C safety cutout safeguarding from overheating

Electronics RF and TV suppressed voltage surge protection

Access porthole for additional temperature probes

Full range of optional extras are also available to suit your requirements - please enquire for details

LMS by Dulas Life Sciences Series 1A cooled incubators offer optimum temperature control from -10 to +50°C with an average variation of 0.5°C and fluctuation of 0.1°C. LMS has been producing scientific incubation products since 1979. Now renowned for their quality and longevity, their cooled incubators are used all over the world for a range of bio-scientific needs - from tissue and fruit fly cultures, to enzyme testing and seed storage. All equipment is manufactured in their own UK factory.

Options include:

Standard single set point control

Automatic dual temperature control for day-night environments

Fully programmable controller

Door lock preventing unauthorised access

Fan assisted air circulation keeping temperatures consistent

Wire shelves for optimum airflow

Powder coated white mild steel exterior with white pre-coated aluminium interior

Hermetically sealed refrigeration system air-tight to avoid controlled temperature loss

Automatic defrost, with a manual override option built in

Self-evaporating condensate drip-tray eliminating the pooling of moisture

Fruit fly modification prevents corrosion caused by fruit fly

RJ 45 interface for remote access (wired) - user friendly control enables performance visibility and parameter changes

Full P.I.D. heating/cooling control optimising power usage when needed

Pre-set 70°C safety cutout safeguarding from overheating

Electronics RF and TV suppressed voltage surge protection

Access porthole for additional temperature probes

Full range of optional extras are also available to suit your requirements - please enquire for details

LMS by Dulas Life Sciences Series 1A cooled incubators offer optimum temperature control from -10 to +50°C with an average variation of 0.5°C and fluctuation of 0.1°C. LMS has been producing scientific incubation products since 1979. Now renowned for their quality and longevity, their cooled incubators are used all over the world for a range of bio-scientific needs - from tissue and fruit fly cultures, to enzyme testing and seed storage. All equipment is manufactured in their own UK factory.

Options include:

Standard single set point control

Automatic dual temperature control for day-night environments

Fully programmable controller

Door lock preventing unauthorised access

Fan assisted air circulation keeping temperatures consistent

Wire shelves for optimum airflow

Powder coated white mild steel exterior with white pre-coated aluminium interior

Hermetically sealed refrigeration system air-tight to avoid controlled temperature loss

Automatic defrost, with a manual override option built in

Self-evaporating condensate drip-tray eliminating the pooling of moisture

Fruit fly modification prevents corrosion caused by fruit fly

RJ 45 interface for remote access (wired) - user friendly control enables performance visibility and parameter changes

Full P.I.D. heating/cooling control optimising power usage when needed

Pre-set 70°C safety cutout safeguarding from overheating

Electronics RF and TV suppressed voltage surge protection

Access porthole for additional temperature probes

Full range of optional extras are also available to suit your requirements - please enquire for details

LMS by Dulas Life Sciences Series 1A cooled incubators offer optimum temperature control from -10 to +50°C with an average variation of 0.5°C and fluctuation of 0.1°C. LMS has been producing scientific incubation products since 1979. Now renowned for their quality and longevity, their cooled incubators are used all over the world for a range of bio-scientific needs - from tissue and fruit fly cultures, to enzyme testing and seed storage. All equipment is manufactured in their own UK factory.

Options include:

Standard single set point control

Automatic dual temperature control for day-night environments

Fully programmable controller

Door lock preventing unauthorised access

Fan assisted air circulation keeping temperatures consistent

Wire shelves for optimum airflow

Powder coated white mild steel exterior with white pre-coated aluminium interior

Hermetically sealed refrigeration system air-tight to avoid controlled temperature loss

Automatic defrost, with a manual override option built in

Self-evaporating condensate drip-tray eliminating the pooling of moisture

Fruit fly modification prevents corrosion caused by fruit fly

RJ 45 interface for remote access (wired) - user friendly control enables performance visibility and parameter changes

Full P.I.D. heating/cooling control optimising power usage when needed

Pre-set 70°C safety cutout safeguarding from overheating

Electronics RF and TV suppressed voltage surge protection

Access porthole for additional temperature probes

Full range of optional extras are also available to suit your requirements - please enquire for details

LMS by Dulas Life Sciences Series 1A cooled incubators offer optimum temperature control from -10 to +50°C with an average variation of 0.5°C and fluctuation of 0.1°C. LMS has been producing scientific incubation products since 1979. Now renowned for their quality and longevity, their cooled incubators are used all over the world for a range of bio-scientific needs – from tissue and fruit fly cultures, to enzyme testing and seed storage. All equipment is manufactured in their own UK factory.

LMS by Dulas Life Sciences Series 1A cooled incubators offer optimum temperature control from -10 to +50°C with an average variation of 0.5°C and fluctuation of 0.1°C. LMS has been producing scientific incubation products since 1979. Now renowned for their quality and longevity, their cooled incubators are used all over the world for a range of bio-scientific needs - from tissue and fruit fly cultures, to enzyme testing and seed storage. All equipment is manufactured in their own UK factory.

Options include:

Standard single set point control

Automatic dual temperature control for day-night environments

Fully programmable controller

Door lock preventing unauthorised access

Fan assisted air circulation keeping temperatures consistent

Wire shelves for optimum airflow

Powder coated white mild steel exterior with white pre-coated aluminium interior

Hermetically sealed refrigeration system air-tight to avoid controlled temperature loss

Automatic defrost, with a manual override option built in

Self-evaporating condensate drip-tray eliminating the pooling of moisture

Fruit fly modification prevents corrosion caused by fruit fly

RJ 45 interface for remote access (wired) - user friendly control enables performance visibility and parameter changes

Full P.I.D. heating/cooling control optimising power usage when needed

Pre-set 70°C safety cutout safeguarding from overheating

Electronics RF and TV suppressed voltage surge protection

Access porthole for additional temperature probes

Full range of optional extras are also available to suit your requirements - please enquire for details

LMS by Dulas Life Sciences Series 1A cooled incubators offer optimum temperature control from -10 to +50°C with an average variation of 0.5°C and fluctuation of 0.1°C. LMS has been producing scientific incubation products since 1979. Now renowned for their quality and longevity, their cooled incubators are used all over the world for a range of bio-scientific needs - from tissue and fruit fly cultures, to enzyme testing and seed storage. All equipment is manufactured in their own UK factory.

Options include:

Standard single set point control

Automatic dual temperature control for day-night environments

Fully programmable controller

Door lock preventing unauthorised access

Fan assisted air circulation keeping temperatures consistent

Wire shelves for optimum airflow

Powder coated white mild steel exterior with white pre-coated aluminium interior

Hermetically sealed refrigeration system air-tight to avoid controlled temperature loss

Automatic defrost, with a manual override option built in

Self-evaporating condensate drip-tray eliminating the pooling of moisture

Fruit fly modification prevents corrosion caused by fruit fly

RJ 45 interface for remote access (wired) - user friendly control enables performance visibility and parameter changes

Full P.I.D. heating/cooling control optimising power usage when needed

Pre-set 70°C safety cutout safeguarding from overheating

Electronics RF and TV suppressed voltage surge protection

Access porthole for additional temperature probes

Full range of optional extras are also available to suit your requirements - please enquire for details

With a maximum of +300°C  and various programming options the M series material test chambers are ideal for material and aging durability tests. With a high air flow, the powerful fans ensure rapid heating.