List of products by brand Minebea Intec

Minebea Intec is a leading manufacturer of industrial weighing and inspection technologies. With more than 150 years experience Minebea Intec provides products, solutions and services to the process industry for increasing the reliability, safety and efficiency of production and packaging lines.

Active filters

Dymond S: X-ray inspection...
  • Integrated network compatibility - remote access for quick error diagnosis and support
  • Easy setup or adjusted by line operators - no special training/ previous X-ray knowledge/no engineer required
  • Intuitive operator control through an icon-based user interface
  • Dual beam ensures small foreign bodies near the glass are detected
  • Reliable detection of a thin glass silver
  • Prevents blind areas when inspecting jars
Dyxim D: X-ray inspection...
  • Integrated network compatibility - remote access for quick error diagnosis and support
  • Easy setup or adjusted by line operators - no special training/ previous X-ray knowledge/no engineer required
  • Intuitive operator control through an icon-based user interface
  • Dual beam ensures small foreign bodies near the glass are detected
  • Reliable detection of a thin glass silver
  • Prevents blind areas when inspecting jars
Dyxim S: X-ray inspection...
  • Integrated network compatibility - remote access for quick error diagnosis and support
  • Easy set up or adjusted by line operators - no special training/ previous X-ray knowledge/no engineer required
  • Intuitive operator control through an icon based user interface
Dylight: X-ray inspection...
  • Easy installation and integration of networks
  • Maximum product safety thanks to the highest degree of detection sensitivity
  • Intuitive, time-saving operation
  • Complete with separator and run-off container
Dymond: X-ray inspection...
  • 15" color touchscreen display
  • Combining high detection sensitivity with low power consumption
  • Covering belt widths from 200 mm up to 800 mm
  • checks completeness
  • determines product mass and compartment mass
  • Easy inspection and cleaning
  • Time and cost saving
  • Hygienic design - following EHEDG principles featuring curved edges and sloped surfaces
Dyxim-FB: X-ray inspection...

Minebea-Intec Dyxim FB series can simultaneously perform in-line quality checks, including counting components, measuring mass and identifying damaged or missing products. The Dyxim FB series inspects large products such as boxes and sacks up to a size of 700mm x 360mm containing dry or liquid food products. If you need to increase product size and material density, the Dyxim FB series' high energy systems are required to ensure a reliable detection of foreign bodies.

Vistus Metal Detector
  • Available standard coil sizes: 75 x 30 mm up to 275 x 60 mm
  • Standard IP65 protection class, IP69K optionally available for enabling high-pressure water cleaning
  • Fast and easy switching between product batches via extensive product memory
  • Easy integration into data networks (wide variety of available interfaces)
  • Free maintenance three-phase motor with worm gear or a three-phase drum motor
  • Control unit fully integrated into the detection coil leaving an extremely compact machine
  • Access protection - user individual passwords or fingerprint authentication (avoiding unauthorized system changes)
Vistus Freefall Metal...
  • Maximum detection sensitivity ensuring a reliable detection
  • Multi-frequency technology
  • Up to four search coils via one terminal - cost effective
  • Efficient separation systems
  • Only to be used in zone 22 - potential explosive environments as per the provisions of Directive 94/ 9/ EC
  • Minimal installation height - easy integration into any application
  • Food standard certified quality pipes
Checkweigher Flexus Combi
  • Easy inspections and cleaning
  • Safety and reliability thanks to EMFC load cell technology
  • Check weight and/ or integrity of your product - optimise your filling processes
  • Reliably detected (all metal foreign bodies, ferrous, non-ferrous metals and non-magnetic stainless steels)
  • Easy to combine with metal detection technology Vistus
  • Easy to integrate into your production environment
  • Minimal effort needed to change to line configurations and quick transitions between products
  • Ideal solution every time
Cosynus Checkweigher and...
  • Display scale divisions 0.1 g to 1g
  • Weighing systems: 1.0 kg, 2.0 kg, 5.0 kg or 7.0 kg
  • 3 display and control units: 6.4" TFT, 10.4" TFT or 15" TFT with touchscreen
  • Aperture width of the coils for metal detection: 225, 275 or 375 mm
  • Aperture height of the coil for metal detection: working height 110 max.
  • Max. throughput 200pcs/min
Checkweigher EWK WS 30/60 kg
  • Verifiable as legal for trade
  • Weighing systems from 700 g to 60 kg
  • Max. throughput 600 items/min.
  • 2 display and control units: 10.4" TFT or 15" TFT with touch screen
  • Special versions and software available
  • Standard deviation from 0.01 g and up
  • Can be optionally combined with a metal detector
  • USB Print option: Standard USB memory stick and standard web browsers for flexible data transfer without a network
Checkweigher Econus
  • Maximum throughput of 120 pcs. per minute
  • IP54 protection class, IP65 available as an option
  • Weight: approx. 120 kg (depending on configuration)
  • Password protection for secure processes
  • Program-controlled belt speed for optimal weighing
  • Easy to clean its stainless steel design
  • Easy to operate belt tensioning mechanism
  • IP65 protection class
  • Easy integration into your product line (without needing an engineer)

Filter By

Industries

Industries

This website uses cookies to ensure you get the best experience on our website.