Classic Carry Case (9L only) for Prestige Medical Classic Portable Autoclaves

• Digital Thermostirrer complete with 8 Litre Stainless Steel Tank and Shelf
• Dimensions - External: 271w x 332d x 170h mm / Internal: 129w x 300d x 150h mm
• Water level: Maximum 130mm shelf fitted working depth 85mm
• Nominal Tank Capacity: 8 Litres
• Temperature Range: ambient +5℃ - 99℃ Accessory DC1-300 provides counter cooling from ambient to -20℃
• Temperature control: PID Digital, LED display, resolution 0.1℃
• Temperature alarm: Under/over temperature alarm is automatically set 4℃ above and 4℃ below set point
• Sensitivity: ±0.05℃
• Uniformity: ±0.01℃
• Timer: Variable, 00:01 to 99:59 hh:mm. Activates at set temperature. End timed period, audible buzzer and and "end" message

• Long-life O2 sensor
• Digital display (on sensor unit)
• Minimal maintenance for the user
• Calibration adjustment of the Safe-Ox+ can be completed using ‘pure air'
• Repeater included
• Plug and play
• Not cross sensitive to He

• 12 Litre Heated, Timed, Ultrasonic baths, with drain outlet
• Dimensions - External: 365w x 278d x 321h mm / Internal: 300w x 240d x 200h mm
• Temperature Range: 30℃ to 80℃ in 5℃ increments.
• Temp. Control: Analogue Dial Pointer
• Timer: Time setting 1, 2, 3, 4, 5, 10, 15, 20, 25, 30 minutes and run time of up to 8 hours
• Ultrasonic Effective Power: 200W
• Ultrasonic peak power: 800W
• Ultrasonic operating frequency: 37kHz
• Comes with lid and basket
• Drain is easy to reach on the rear of the bath, with a drain tap on the side making it easy to open and close with clear symbols on position and function.

• Measuring range -30℃ to +70℃
• Accuracy ±0,5℃ (-20℃ to +40℃) ±0,8℃ for the remaining measuring range
• Resolution 0,1℃
• Operating Temperature -30 ‚àû to +60℃
• Memory 40.000 measurement value
• Sensor NTC
• Sample Rate 1min to 24h
• Measured variables temperature
• IP Rating IP 67
• Battery 3V Lithium (CR2450), exchangeable by user
• Battery lifetime approx. 1 year
• Dimensions 69 x 48 x 22 mm
• Weight approx. 45 g
• Certificate Factory calibration certificate

• Available pan/platform size: 90x90mm
• Available capacities: 60g - 320g
• Available readability: 0.1g
• Legal verification
• Easy clean
• Data interface: RS232 + USB C
• Internal adjustment
• Kensington anti-theft lock
• LED screen
• Touchscreen
• Easily adapts to your ambient conditions
• Built-in applications with GLP | GMP compliant printout | data output
• Plug-and-play convenience
• Password protection for secure operation
• Manual leveling
• Data output for dynamic weighing applications
• Highest quality standards, engineered in Germany
• Provide gap-less documentation with the new advanced line's CalAuditTrail
• isoCAL (internal calibration and adjustment) for total assurance of accurate weighing results

• Rotor Style: Swing out
• Aerosol tight: Not applicable
• Maximum Capacity(Rotor): 6 x 5 ml
• Maximum Relative Centrifuge Force (x g): 1,817 g
• Maximum Speed: 4,000 rpm
• Tube diameter without adapter: 14 mm / 5 ml
• Outer/Inner Radius: 105 mm
• Acceleration Time (sec): 8 / 35
• Angle: 0-90∞

• Two-table construction keeps the granite slab in the middle and reduces interference
• Large work surface of 400 x 450mm
• Scratch-resistant granite slab
• Black laminated tabletop provides ample work surface for resting samples or documents
• Lightweight tubular aluminium frame
• Adjustable levelling feet for uneven surfaces
• Polished finish is easy to clean
• Overall Dimensions: 800x600x782mm (wxdxh)
• Total weight of table and work surface 55kg

Thermal Printer (Bluetooth) is for use with the Map Pak 2 O2 or Combi Modified Atmospheric Packaging Gas Analysers only.

• Maximum Speed: 6,800 rpm
• Maximum Relative Centrifuge Force (x g): 4,445 g
• Maximum Capacity(Rotor): 8 x 15 ml
• Tube diameter without adapter: 18 mm / 15 ml
• Outer/Inner Radius: 8.6 cm
• Rotor Style: Angle
• Aerosol tight: Not applicable
• Acceleration Time (sec): 8 / 35
• Angle: 32 deg.
• Compatible Models: FC5707
• Deceleration Time (sec): 7 / 25
• Dimensions: 6.93 in (17.6 cm)
• Maximum loading weight: 200 g
• Net Weight: 1.72 lb (0.78 kg)
• Working Environment: -4℉ to 122℉, 95% RH, non-condensing (Temperature: -20℃ to 50℃, Humidity: <  95%)

• Triple layer for maximum robustness and durability
• Equipment Integration is capable of customisation to allow integration of radiopharmacy equipment such as generator and dose calibrator.
• Lead-lining Options are capable of adding a horizontal sliding chest shield, an L-block, or lead-lined walls.
• Reinforced work surface is strong enough to hold the weight of heavy lead bricks, capable of holding up to 15kN/m2
• Isocide™ Antimicrobial Powder Coating eliminates 99.9% of surface bacteria within 24 hours of exposure

• Recommended operating temperature: -5 to 70℃
• pH range: pH: 0 to 12
• Glass body material
• Supplied with BNC connector
• Supplied with 1m cable
• Suitable for pH measurement

• Digital Water Circulator complete with 14 Litre Stainless Steel Tank and Shelf
• Dimensions - External: 361w x 332d x 170h mm (Thermocirculator additional 120mm to bath height) / Internal: 219w x 298d x 150h mm
• Water level: Maximum 130mm shelf fitted working depth 85mm
• Nominal Tank Capacity: 14 Litres
• Temperature Range: Ambient +5℃ - 99℃ Accessory DC1-300 provides cooling from ambient to -20℃
• Temperature control: PID Digital, 4 digit LED display, resolution 0.1℃
• Temperature alarm: Under/over temperature alarm is automatically set 4℃ above and 4℃ below set point
• Sensitivity: ±0.05℃
• Uniformity: ±0.01℃
• Timer: Variable 00:01 to 99:59 hh:mm Activates at set temperature. End timed period, audible buzzer and end message
• Pump capacity and pressure: 10 litres/min - 150mbar Pressure drop can occur with pipe height, length, bore, bends and liquid temperatures below ambient
• Pump connection ports: Inlet and outlet ports take 4mm bore x 6mm o/d tubing

• Available capacities: 12,000g - 35,000g
• Available readability: 0.1g
• 377 mm x 311 mm platform size
• 5.7” colour VGA touch screen
• Two sensors on display offer hands-free operation
• The display can be separated from the base up to 1.5m
• 2-D shock protection and IP54 base enclosure protect the balance from damage
• GLP/GMP data output with real-time clock
• Programmable IR sensors
• Weighing Units: Milligram, Gram, Kilogram, Custom

• Available capacities: 1.5kg - 30g
• Available readabilities:0.05g - 5g
• Available readabilities (certified):0.5g - 10g
• ABS housing and stainless steel platform
• 225 mm x 300 mm platform
• Precise counting and weighing performance with 30 item library
• 3 window backlit LCD with 3 colour check weighing LEDs
• 1:1,500,000 internal counting resolution
• Portability with a convenient carrying handle and rechargeable battery (210hrs)
• Selectable environmental and auto-print settings
• Weighing Units: Gram, Kilogram

• The powerful and extremely quiet motor has a 'soft' start-up and run-down function to prevent possible damage to samples from sudden jolting.
• Convenient interchangeable rotor for 6 or 12 tubes or 2 microplates provides flexibility for an easy change in an application
• Choice of interchangeable rotors for up to 12 centrifuge tubes or 2 microtitre plates
• Easy set-up of spin speed and time via 2-line LCD display and simple push buttons
• Sturdy metal housing and lid, automatic imbalance switch-off and lid lock when the centrifuge is running provide for safe operation in your workplace
• Compact design with a small footprint - fits neatly into the workspace
• Spin speed: up to 3000 rpm for tubes, up to 2000 rpm for microtitre plates
• Timed operation (1 to 90 minutes), with automatic switch-off