Shakers

• Variable shaking speed: 150 to 1200 rpm
• Direct drive mechanism and brushless motor
• Set and display the speed (rpm)
• Holds two or four microtitre plates
• Quick and easy screw fitting of any standard-depth 96-
• Continuous or timed operation, with automatic switch off
• Platform for two microtitre plates supplied as standard. Platform for four plates (MPP-4) available as an option
• Easy-to-use integral electronic timer ensure accurate count-down and repeatability of time-sensitive incubations
• Quick and easy to use screw fittings keep the plates securely in position and allow fitting on any standard-depth 96-
• Easy to read LED display clearly indicates time remaining on timed operations and speed in rpm
• Simple graduated dial to adjust the speed to suit the application: – gentle shaking to ensure that the well contents remain in situ, or more vigorous agitation for effective aeration across the surface area of each well

• Variable shaking speed: 50 to 450 rpm
• Interchangeable platforms for use with a variety of vessels
• Loads up to 3 kg
• Continuous or timed operation with automatic switch-off
• Reliable direct drive system
• Automatic load balancing system
• Soft start feature ensures a smooth ramp-up – avoids potential damage to vessel content
• Exceptionally quiet motor – consistent even shaking
• 2-line LCD display clearly indicates both set and actual shaking speed, plus set and elapsed time. Works in combination with simple push buttons for easy set-up
• Choice of 4 interchangeable platforms to suit different types of vessels – maximum flexibility
• Low voltage power supply provides for safe cold room operation and low energy consumption
• Ambient operating temperature range of 4 to 40ºC allows use in cold room or incubator
• Integral electronic timer with audible alarm and automatic switch-off – accurate repeatability of time-sensitive incubations

• Temperature setting range: ambient + 25 to 100ºC
• Temperature control range: ambient +5 above ambient to 100ºC
• Temperature stability ±0.1℃
• Shaking speed: 250 to 1400 rpm
• Continuous or timed operation, with alarm buzzer and automatic switch-off facility
• Convenient interchangeable blocks
• 2-line LCD display clearly indicates both set and actual values for temperature, shaking speed and time
• Blocks sold separately

Grant Instruments TS-DW Deep well plate Thermoshaker designed for shaking and heating of deep well plates. A multisystem principle, used in the design of the thermoshaker allows it to operate as 3 independent devices:

• Incubator
• Plate shaker
• Thermoshaker

Blocks sold separately

• Temperature setting range: + 25℃ to 100℃
• Temperature stability ± 0.1℃, temperature uniformity ± 0.2℃ due to the bi-directional heating system (platform and lid)
• Shaking speed: 250 to 1200rpm
• Rapid heat-up
• Continuous or timed operation, with alarm buzzer and automatic switch-off facility
• Choice of two models with capacity for two (PHMP) or four (PHMP-4) 96- or 384-well microplates
• The heated lid completely covers the flat heating plate to provide bi-directional heating and excellent temperature stability and uniformity, whilst preventing condensation
• Combination of bi-directional heating and powerful orbital shaking capability produces the maximum yield from incubations
• Very easy to operate, with simple set-up of temperature, shaking speed and time via push buttons and the 2-line LCD status display

• Orbital motion, reciprocation and vibration functions all in one product
• Reliable direct drive system
• Fully programmable sequence of functions
• Simple to set up and easy to operate
• Interchangeable platforms, including multi-level platform option
• Loads up to 8 kg
• Orbital and reciprocating speed: 20 to 250 rpm
• Reciprocal rotation: 30 to 360º turning angle
• Vibration: 0 to 5º turning angle, programmable in a burst of 0 to 5 seconds
• Direct drive system
• Brushless motor for longetivity
• Powerful, reliable and exceptionally quiet motor –  combines 8 kg loading capacity with consistent even motion and quiet operation
• Universal detachable platform can accommodate vessels of different shapes and sizes for maximum flexibility.

• Motion: Orbital, 19 mm
• Capacity: 16 kg
• Speed Range: 25 rpm - 500 rpm
• Load sensor detects unbalanced conditions and automatically reduces to a safe speed
• Applications: Cell Cultures, Solubility Studies, Extractions, Bacteria & Yeast Cultures and Suspensions, Staining/Destaining, Immunoassays, Protein Studies, Blotting Techniques

Grant Instruments PCMT PLUS provides intensive mixing and temperature control of samples in microtubes or PCR plates. This model differs from the PCMT and PHMT with features including cooling and the ability to control 7 units to a PC via Bluetooth®.

• Digital control of time, temperature and shaking speed for accuracy and repeatability
• Variable speed: 50 to 250 rpm
• Temperature setting range: 25 to 42℃
• Load up to 2.5 kg
• Interchangeable platforms for shaking/incubating different vessels
• Temperature control by microprocessor plus forced heated air circulation ensures a constant and even temperature within the chamber
• Equipped with a direct drive shaking system for reliable, long-term operation
• Simple to programme time, temperature and shaking speed using clear 2-line 16 character LCD
• Option of four easily interchangeable platforms for a wide range of different
• Robust, compact construction with clear 7mm thick Plexiglass panels for easy visibility of chamber contents
• Designed for easy assembly/disassembly – easy to move from one location to another
• Platform sold separately

• Intuitive touchscreen allows the user to view all steps of the program while monitoring the progress.
• Hot top indicator
• audible alarm
• maximum temperature limiting function
• temperature priority function
• pulse/quick mix mode, temperature calibration mode
• temperature ramp rate
• Functions - DNA, RNA, Cell Cultures, Hybridisations, Protein Studies
• 4.3 inch (10.9 cm) color touchscreen Liquid Crystal Display (LCD) which can be programmed in six languages
• Detachable 3-wire cord and plug (included), unit requires a block - compatible with Eppendorf Thermomixer® R blocks
• USB port provides greater flexibility in data collection and transfer
• Valox cool touch housing, removable plastic rack, cover and screwdriver for block removal (included

• Motion: Orbital, 25 mm
• Capacity: 22.7 kg
• Speed Range: 25 rpm - 500 rpm
• Load sensor detects unbalanced conditions and automatically reduces to a safe speed
• Applications: Cell Cultures, Solubility Studies, Extractions, Bacteria & Yeast Cultures and Suspensions, Staining/Destaining, Immunoassays, Protein Studies, Blotting Techniques

• Achieve reproducible results you can trust. Precisely adjust the tilt angle in 1° increments, vary the speed by 1 rpm and set temperature in 1°C increments with intuitive touchpad controls.
• Innovative speed ramping feature slowly increases speed to desired setpoint to avoid splashing. Smooth rocking or waving motion is maintained with unique, state-of-the-art motor and electronics.
• Spill-resistant design, overload protection with audio/visual alarm on digital models and audible alarm on analog models, caution hot indicator
• Hybridisations, Cell Cultures, Blotting Techniques, Staining and Destaining Gels
• Easy-to-read, independent LED displays for temperature, speed/tilt angle and time, allow the operator to view all settings simultaneously
• Detachable 3-wire cord and plug (included)
• Cast aluminium housing with polycarbonate lid

• Industry Leading Thermal Shaker with Exceptional Heating/Cooling Performance with High Speed Shaking
• Best in class for temperature performance.
• Enhanced electronics and software allow for fast and accurate temperature control you can trust. Cooling models reach temperatures down to 17°C below ambient.
• Intuitive touchscreen for simple operation and programming. Set the functions and the comprehensive help screens in one of six languages to guide the user through the operation of the unit.
• Easily create programs for repeat applications. Storage for five separate, 5-step programs. The USB port allows the transfer of test data to a flash drive for data logging and program storage.
• Hot top indicator, audible alarm, maximum temperature limiting function, temperature priority function, pulse/quick mix mode, temperature calibration mode, temperature ramp rate function DNA, RNA, Cell Cultures, Hybridisations, Protein Studies
• 4.3 inch (10.9 cm) color touchscreen Liquid Crystal Display (LCD) which can be programmed in six languages
• Detachable 3-wire cord and plug (included), unit requires a block - compatible with Eppendorf Thermomixer® R blocks
• USB port provides greater flexibility in data collection and transfer
• Valox cool touch housing, removable plastic rack, cover and screwdriver for block removal (included)

• Digital control of time, temperature and shaking speed for accuracy and repeatability
• Variable speed: 50 to 250 rpm
• Temperature range: 25 to 80℃
• Load up to 8 kg
• Interchangeable platforms for shaking/incubating different vessels
• Temperature control by microprocessor plus forced heated air circulation ensures a constant and even temperature within the chamber
• Robust, compact construction with stainless steel inside the chamber
• Equipped with a direct drive shaking system for reliable, long-term operation
• Simple to programme time, where1 minute to 96 hours or non-stop
• State-of-the-art motor, thermal insulation materials and temperature PID-control decreases the energy consumption
• Platform sold separately

• Motion: Orbital, 25 mm
• Capacity: 22.7 kg
• Speed Range: 20 rpm to 500 rpm
• Load sensor detects unbalanced conditions and automatically reduces to a safe speed
• Applications: Cell Cultures, Solubility Studies, Extractions, Bacteria & Yeast Cultures and Suspensions, Staining/Destaining, Immunoassays, Protein Studies, Blotting Techniques

• Motion: Orbital, 19 mm
• Capacity: 16 kg
• Speed Range: 25 rpm to 500 rpm
• Load sensor detects unbalanced conditions and automatically reduces to a safe speed
• Applications: Cell Cultures, Solubility Studies, Extractions, Bacteria & Yeast Cultures and Suspensions, Staining/Destaining, Immunoassays, Protein Studies, Blotting Techniques

• Motion: Orbital, 51 mm
• Capacity: 45.4 kg
• Speed Range: 15 rpm to 300 rpm
• Load sensor detects unbalanced conditions and automatically reduces to a safe speed
• Applications: Cell Cultures, Solubility Studies, Extractions, Bacteria & Yeast Cultures and Suspensions, Staining/Destaining, Immunoassays, Protein Studies, Blotting Techniques

• Motion: Orbital, 25 mm
• Capacity: 45.4 kg
• Speed Range: 15 rpm to 500 rpm
• Load sensor detects unbalanced conditions and automatically reduces to a safe speed
• Applications: Cell Cultures, Solubility Studies, Extractions, Bacteria & Yeast Cultures and Suspensions, Staining/Destaining, Immunoassays, Protein Studies, Blotting Techniques

• Motion: Orbital, 25 mm
• Capacity: 68 kg
• Speed Range: 15 rpm to 500 rpm
• Load sensor detects unbalanced conditions and automatically reduces to a safe speed
• Applications: Cell Cultures, Solubility Studies, Extractions, Bacteria & Yeast Cultures and Suspensions, Staining/Destaining, Immunoassays, Protein Studies, Blotting Techniques

• Motion: Orbital, 51 mm
• Capacity: 68 kg
• Speed Range: 15 rpm to 300 rpm
• Load sensor detects unbalanced conditions and automatically reduces to a safe speed
• Applications: Cell Cultures, Solubility Studies, Extractions, Bacteria & Yeast Cultures and Suspensions, Staining/Destaining, Immunoassays, Protein Studies, Blotting Techniques