• White, water resistant, casing
• Easy clean sample well
• Zero using pure water
• Battery operated with auto shut-off
• 1.5 second measurement time
• Direct readout in % Brix and ℃
• Automatic temperature compensation
• No calibration solutions required
• Large clear LCD display

Our Cohesive Sampler is the ideal quality control tool for taking samples of sticky, non flowing solids. The sampler has a rugged 316L stainless steel construction and is available in different volumes. The standard length is 1m with special lengths are available on request. The sampler has a scraper next to the pocket. This is used to push the powder into the pocket.

Set includes:

• HC2-AW-USB Water Activity Probe
• HW5 Software code
• WP-40 Sample holder for PS14 and PS40 sample liners
• PS-14 14mm plastic sample liners (100 units)
• PS-40 40mm plastic sample liners (100 units)
• EA35-SCS, EA80-SCS, EA50-SCS, EA10-SCS Humidity standards (1 pack each)

Benefits:

• Complete set of probe and HW5 software including Aw Quick function available
• Measurement range: 0.00 - 1.00 Aw, -40℃ - 85℃
• Wire mesh filter with 20 - 25um pore size
• USB interface for direct connection to a PC (HC2-AW-USB)
• Lightweight design

Training for the Rotronic water activity meters is available for an additional cost. Please contact us for more information on pricing and availability.

Digest at twice the speed with the infrared digestion unit TURBOTHERM. Sample preparation for Kjeldahl analysis can be time-consuming. Acid digestion using TURBOTHERM is different:

• Fast: digest up to 12 samples per hour, this saves 50% of the time needed for conventional block digestion
• Safe: thanks to direct and even heating, boiling distortion is no longer an issue, the heating power applied can be varied infinitely, and you can also digest strongly foaming, aqueous and large-volume samples without having to worry
• Flexible: optimised for, but not limited to, Kjeldahl acid digestion - sample preparation made easy!

Includes TURBOTHERM basic system, 12 x digestion tubes, insert rack for tubes, exhaust manifold with drip tray, 1.5m isoversinic tubing, and console

• Internal Sensor with fixed 4.5 to 3.3 mm tip x 100 mm probe
• Waterproof, food-grade 316 stainless steel case (IP66/67)
• Temperature range -20 to 125℃
• Integral USB interface for setup and download
• Sample rate 1 to 255 minutes
• Available with UKAS 3 point certificate

• Available options: CO2 only, CO2 & O2, CO2 only w/ RH Probe, CO2 & O2 only w/ RH Probe or CO2 only w/ 1m Sample Probe
• Measure and monitor the air in office buildings to ensure conditions are optimal for your staff
• Measure CO2 0-10000ppm
• Built-in gas moisture removal
• Quick verification of CO2 levels for site audits
• Improved accuracy on CO2 readings
• Optional dual temperature probes help you to adjust the temperature to stabilise conditions within your incubator and help you analyse temperature variation (please add to cart from the drop-down)

• Stirring Speed Range: 6-400 rpm (I), 30-2000 rpm (II)
• Stirring Volume (H2O): up to 100l
• Maximum Viscosity (cP or mPa's): 100 000
• Maximum Torque (Ncm): 200
• Application: Stirring, dissolving, dispersion, emulsification and homogenisation in the food and beverage, cosmetic, paint/coatings, pharmaceutical, chemical, glue/adhesive, plastics/polymer and cement/construction industries. Used for pilot scale in manufacturing.
• Construction: Sealed aluminium housing with IP54 ingress protection rating, Keyless Chuck for simple, one-hand operation, brushless motor for quiet operation, and main power switch
• Display: Bright LED digital display for speed, real time torque tendency LED indicator bar, and integrated timer

• Sparkfree safety interior
• Manual defrost
• 3 shelves
• Door Lock
• Temperature display
• High/Low temperature alarm
• Door Open alarm
• Self closing door
• 2 year parts and labour warranty (UK only)
• Key lock with two keys supplied

• Motion: Orbital, 25 mm
• Capacity: 45.4 kg
• Speed Range: 15 rpm to 500 rpm
• Load sensor detects unbalanced conditions and automatically reduces to a safe speed
• Applications: Cell Cultures, Solubility Studies, Extractions, Bacteria & Yeast Cultures and Suspensions, Staining/Destaining, Immunoassays, Protein Studies, Blotting Techniques

Jumbo Sack Samplers allow you to quickly and efficiently take samples from sacks and large bags. Our Jumbo Sack Samplers have a large 40mm diameter and so can be used typically for nut, bean, seed and granule sampling. Available in 2 lengths and 3 different styles: Plain style - simply hold over a bag End Cap - sample is held in the sampler until the sample is deposited Bottle adapter - sample drops straight into the bottle.