• 15" color touchscreen display
• Combining high detection sensitivity with low power consumption
• Covering belt widths from 200 mm up to 800 mm
• checks completeness
• determines product mass and compartment mass
• Easy inspection and cleaning
• Time and cost saving
• Hygienic design - following EHEDG principles featuring curved edges and sloped surfaces

A BINDER material test chamber with mechanical convection of the FP series provides reliably short drying times and particularly fast heating Ð even for chambers under full loads.

• Double-hinged sash mechanism with arm ports
• Sash with 13° sloping to help minimize glares and reflections allows easy access to the work zone without risking exposure to chemical fumes
• Higher sash opening for effortless cabinet loading
• Baffles improve airflow and prevent fume accumulation in the work area.
• Main Filter: Nanocarb™ Activated carbon, available in 8 types
• Efficient perimeter clamping ensures no leakage as well as allows easy filter change procedure.
• Sample Port - For manual determination of filter saturation through colour tubes
• Filter ID window - to easily determine the type of carbon filter installed in the unit
• Isocide™ Antimicrobial Powder Coating eliminates 99.9% of surface bacteria within 24 hours of exposure

The stainless steel Powder Thief sampler is designed for fast sampling of granules and powders. A single body can accept a wide range of tip sizes from 20ml to 100ml. It is extensively used throughout the pharmaceutical, chemical and food industries around the world.

Sampling Tip Only

Shafts:

PowderThief dia. 32mm shafts

PowderThief dia. 12.5mm shafts

• 3 Year Vacuum Warranty
• Rugged and Durable
• Cryo absorbant
• Vapour Phase Storage
• No Liquid Nitrogen Spillage

• White, water resistant, casing
• Easy clean sample well
• Zero using pure water
• Battery operated with auto shut-off
• 1.5 second measurement time
• Direct readout in % Brix and ℃
• Automatic temperature compensation
• No calibration solutions required
• Large clear LCD display

• Braided or armoured stainless steel lead
• Range -50 to 250℃ (braided) -50 to 350℃ (armoured)
• Accuracy (type K) ±0.5℃, 0℃ to 100℃
• Ideal for oven temperature monitoring

• Capacity, g=51
• Readability, g=0.001

• 28L capacity
• Temperature range: +60 ℃ to +230 ℃
• Adjustable exhaust air flap
• Hydro-mechanical thermostat
• Class 1 temperature limitation device (Model E028-230V-T)
• Timer 0 where120 min
• 2 chrome-plated racks
• Uniform drying conditions thanks to APT.line™ technology
• Identical test conditions throughout the chamber interior independent of sample size and quantity
• Outstanding thermal insulation saves operation costs

HI-97745 is an advanced portable photometer for the measurement of free and total chlorine, total hardness, iron – low res, and pH in water.

•  pH
•  Chlorine
•  Iron
•  Hardness

Ranges: Magnesium Hardness 0.00 to 2.00 mg/L (as CaCO3); Calcium Hardness 0.00 to 2.70 mg/L (as 3); Total Hardness 0.00 to 4.70 mg/L (as 3); pH6.5 to 8.5 pH.

This meter offers a superior optical system that utilises a reference detector and narrow band interference filters for extremely fast and repeatable measurements.

• No warm up time before taking a measurement
• Tutorial mode for step-by-step instructions
• Uses either powder or cost saving liquid reagents
• Each photometer is delivered in a cardboard box and is supplied with:

• Calibration=External
• Capacity, g=400
• Dims, w x d x h, mm=190 x 218 x 55
• Pan Dims, mm=Ø 110
• Readability, g=0.01

Class A PT100 sensor ideal for HVAC measurements

Probe temperature range -100 to 200℃

Accuracy ±0.15℃ ±0.2%

Dia. 3.3 x 130mm

• One touch automatic calibration
• Capacity, g=220
• Dims, w x d x h, mm=193 x 263 x 85
• Pan Dims, mm=Ø 130
• Readability, g=0.001