• Completely portable
• Pocket-sized about 4 x 3 x 1 inch
• Lightweight (4 ounces)
• Runs for about 3 years on 2 button cell batteries
• Easy two-point calibration
• Uses regular AQUALAB cups and standards

Our Legionella Industrial testing kit is perfectly designed for water outlets needing repeat testing and includes everything needed to complete 5 tests. It uses our exclusive Hydrosense filter technology, enabling the isolation of bacteria through conventional plumbing connections (compatible with US ½ inch NPT and ¾ inch BPT fittings). The pipe fitting also conveniently connects directly to standard shower hoses.

Ideal for use in higher risk areas with water sample points that require frequent monitoring, including industrial cooling systems, extensive water networks within hotels, healthcare facilities, residential buildings, and commercial premises.

Flexible thermoreactor for sample preparation of photometrical determination of COD, total chrome, total phosphate, total nitrogen and TOC. Digestion is possible with three temperature ranges and three pre-programmed reaction times.

• Three Temperature Ranges
• The reactor can operate optionally with 100°C, 120°C or 150°C – depending in each case on the sample to be prepared.
• Three Different Reaction Times
• Three different reaction times are available with 30, 60 and 120 minutes. Your advantage: Afterwards the unit switched itself off automatically.
• Large Cuvette Shaft
• Place up to 24 16-mm-round cuvettes in the RD 125.
• Voltage Change Possible
• The RD 125 can be used with various voltages: Choose 110 V and 220 V with the voltage selector on the back.

Our comprehensive and sensitive Legionella swab test is designed for testing surfaces and biofilm. The process involves collecting a sample through swabbing areas where biofilm accumulates e.g. shower heads, taps, storage tanks, pipework and the water edge of pools or hot tubs.

Biofilm is the common habitat for Legionella pneumophila. This slimy substance protects this bacterium from heat or chemical treatments.

This method is highly recommended for evaluating surfaces in environments such as cooling towers, water tanks, sinks, showers, hot tubs, misters, sprinklers, air washers, and humidifiers, among others.

• Easy to use
• Optimal documentation of your quality
• Long stable humidity sensor
• Easy data storage at the portable moisture meter
• Analysis on PC and printer available
• Automatic datalog for up to 10,000 logs with measuring point report
• Online-function, Hold function, manual data memory
• Relative humidity, absolute humidity, dew point, equilibrium moisture content, aw value

Our comprehensive and sensitive Legionella testing solution is designed for water safety. This advanced one-time-use kit uniquely detects all serogroups (1-15) of the most dangerous Legionella species, Legionella pneumophila in just 25 minutes.

Easy-to-use test; it can be carried out by anyone in any setting and requires minimal training. Our visual instructions provide a simple step by step guide.

Ideal for cooling towers, water storage units, decorative fountains, taps, showers, spas, swimming facilities, and more, this solution offers exceptional coverage and reliability. Its unparalleled sensitivity and comprehensive detection capabilities make it the preferred choice for high-risk areas, ensuring the highest level of Legionella detection.

• More than 150 programs for routine analysis
• Test kits for every demand: from high precisely to easy, fast and economic
• Storage with Identification Number (ID)
• Data filter for easy selection of data sets
• Electrochemical pH-measurement from pH 0–16.00 (± 0.01) for Standard DIN pH-electrodes
• Automatic Temperature Compensation (ATC)
• Redox Measurement
• 1-3 point calibration with calibration interval setting and calibration protocol
• IR light source acc. to DIN 27027/ISO 7027
• Turbidity measurement range from 0.01-1100 NTU/FNU providing drinking water accuracy
• Longterm stable AMCO Clear Standards with ±1% manufacturing accuracy
• The most versatile colorimeter for field and lab

This is an advanced portable photometer for the measurement of pH parameters in water. This meter offers a superior optical system that utilises a reference detector and narrow band interference filters for extremely fast and repeatable measurements. The photometer has an innovative optical system that offers superior performance in accuracy, repeatability and the short amount of time it takes to perform a measurement. This compact, waterproof meter is extremely user friendly with a tutorial mode that walks the user graphically, step by step, in performing a measurement. The use of a backlit dot matrix LED allows the use of virtual keys which makes the operation of the meter very intuitive including selecting different methods, reviewing GLP data, recalling the last 50 measurements, and customising the meter to user preferences.

• Each photometer is delivered in a cardboard box and is supplied with: