• Replacement sensor for LAQUAtwin B-771, EC-11, EC-22, and EC-33
• Requires a minimum of 0.12 ml sample
• Corrosion-resistant titanium / platinum black cell material
• Waterproof

• Spherical glass tip
• 3.5 connection
• Easy to use
• Glass electrode body
• Double junction reference
• CPS sleeve junction
• 6 months warranty

Spear-type pH combination electrode for penetration measurements in meat, fruit and cheese, with fixed cable and waterproofed DIN plug.

Buy together with XYL-WTW-903843 to use as a puncture knife pH probe.

Replacement sensor for ELITEPH Tester

• Replacement sensor for LAQUAtwin B-722 and Na-11
• Requires a minimum of 0.3 ml sample with direct measurement (0.05 ml with sampling sheet B) 
• Sensor guard has a sliding cap for scooping water sample
• Waterproof

• 514-23 12.9 mS/cm Conductivity Standard Solution
• 14-ml x 6 bottles
• For LAQUAtwin B-771, EC-11, EC-22, EC-33

• Y048 Sampling Sheet Holder
• If tiny particles are contained in a sample (e.g., soil extract), the particles influence measurement results. Please use sampling sheet B together with sampling sheet holder.
• For LAQUAtwin pocket meters, except conductivity and salt EC models

• 1.5 m in length
• Other lengths available
• Waterproof connection between plug and meter (IP67)
• Pressure resistant connection between sensor and cable plug (IP 68, 10 bar)
• Tearproof design

• Easy to use
• Wireless
• Full complete wireless module kit available

• pH measuring range 0 to 14
• Gel electrolyte
• Plastic shaft
• Integrated temperature sensor
• Safely measured values due to signal processing in the sensor
• Easy electrode replacement thanks to calibration data stored inside sensor
• Sensor quality monitoring by QSC function
• Memory for 10 calibration records
• QSC function

• Replacement sensor for the B-741,B-742,B-743,B-341,342,343
• Flat electrode for nitric ion which is so selective that pH or other ions do not affect it.

• Replacement sensor for LAQUAtwin B-731 and K-11
• Requires a minimum of 0.3 ml sample with direct measurement (0.05 ml with sampling sheet B)
• Sensor guard has a sliding cap for scooping water sample
• Waterproof

• 514-22 1.41 mS/cm (1413µS/cm) Conductivity Standard Solution 
• 14-ml x 6 bottles
• For LAQUAtwin B-771, EC-11, EC-22, EC-33

• Y046 Sampling Sheet B
• Contains 100 pcs. / box
• Use for minute samples (minimum of 0.05 ml) and particulate-containing samples (e.g., soil extract). For the latter, please use sampling sheet holder and cover the sensor during measurement.
• For LAQUAtwin and Twin pocket meters, except conductivity and salt EC models

• Replacement sensor for the B-713, pH 11, ph 22, pH 33
• Employing the same test principle as standard laboratory electrodes, the LAQUAtwin packs all components into a flat sensor that’s less than 1 mm thick.
• Waterproof construction protects the instrument.

• Replacement sensor for LAQUAtwin B-751 and Ca-11
• Requires a minimum of 0.3 ml sample with direct measurement (0.05 ml with sampling sheet B)
• Sensor guard has a sliding cap for scooping water sample
• Waterproof