The calibration water bath from ETI offers a compact, accurate and reliable system. It can be used for the temperature calibration of temperature probes and thermometers using the comparison method. For increased accuracy checks, ETI recommends a Reference Thermometer should be used as a calibration reference. ETI recommends the bath be filled with distilled water, between 60 to 80℃ 15% glycerine water solution and between 80 to 95℃ a suitable silicone oil.
Benefits
Range +25 ℃ to 95 ℃
LED digital display
Easy-to-use
User friendly
Minimal setup required
5/8” ID Rubber tubing
UK mains lead
Supplied with lid, drain tap and carry handles
Specifications
822-950
Range
+25 to 95 ℃
Resolution
0.1 ℃/deg. F
Accuracy
±1 ℃ (+25 to 70 ℃) - better than ±0.2 ℃ if the calibration bath is used in conjunction with Reference Thermometer
Bath capacity
5 litres
Pump flow/speed
0 to 20 litres per minute
Bath stability
±0.1 ℃ over a 45 minute period
Bath uniformity
±0.1 ℃ when measured from centre to any corner
Display
LED digital
Dimensions
Internal: 130 x 130 x 260 mm, External: 318 x 380 x 445 mm
Weight
12000 grams
ETI-822-950
Our standard delivery is 3-5 working days (where products are available) Monday to Friday, excluding public holidays when you order by 2pm. Details of our returns and cancellation policy can be found in our Returns Policy & Section 11 of our Terms and Conditions. For more information please contact us on 01924 444 577 or Email Us.
12 Litre Heated, Timed, Ultrasonic baths, with drain outlet
Dimensions - External: 365w x 278d x 321h mm / Internal: 300w x 240d x 200h mm
Temperature Range: 30℃ to 80℃ in 5℃ increments.
Temp. Control: Analogue Dial Pointer
Timer: Time setting 1, 2, 3, 4, 5, 10, 15, 20, 25, 30 minutes and run time of up to 8 hours
Ultrasonic Effective Power: 200W
Ultrasonic peak power: 800W
Ultrasonic operating frequency: 37kHz
Comes with lid and basket
Drain is easy to reach on the rear of the bath, with a drain tap on the side making it easy to open and close with clear symbols on position and function.
Digital Water Circulator complete with 22 Litre Stainless Steel Tank and Shelf
Dimensions - External: 537w x 332d x 170h mm / Internal: 395w x 298d x 150h mm
Water level: Maximum 130mm shelf fitted working depth 85mm
Nominal Tank Capacity: 22 Litres
Temperature Range: Ambient +5℃ - 99℃ Accessory DC1-300 provides cooling from ambient to -20℃
Temperature control: PID Digital, 4 digit LED display, resolution 0.1℃
Temperature alarm: Under/over temperature alarm is automatically set 4℃ above and 4℃ below set point
Sensitivity: ±0.05℃
Uniformity: ±0.01℃
Timer: Variable 00:01 to 99:59 hh:mm Activates at set temperature. End timed period, audible buzzer and end message
Pump capacity and pressure: 10 litres/min - 150mbar Pressure drop can occur with pipe height, length, bore, bends and liquid temperatures below ambient
Pump connection ports: Inlet and outlet ports take 4mm bore x 6mm o/d tubing
30 Litre Heated, Timed, Ultrasonic baths, with drain outlet
Dimensions - External: 570w x 350d x 320h mm / Internal: 500w x 300d x 200h mm
Temperature Range: 30℃ to 80℃ in 5℃ increments.
Temp. Control: Analogue Dial Pointer
Timer: Time setting 1, 2, 3, 4, 5, 10, 15, 20, 25, 30 minutes and run time of up to 8 hours
Ultrasonic Effective Power: 300W
Ultrasonic peak power: 1200W
Ultrasonic operating frequency: 37kHz
Supplied with a lid and basket.
Drain is easy to reach on the rear of the bath, with a drain tap on the side making it easy to open and close with clear symbols on position and function.
Digital Water Circulator complete with 14 Litre Stainless Steel Tank and Shelf
Dimensions - External: 361w x 332d x 170h mm (Thermocirculator additional 120mm to bath height) / Internal: 219w x 298d x 150h mm
Water level: Maximum 130mm shelf fitted working depth 85mm
Nominal Tank Capacity: 14 Litres
Temperature Range: Ambient +5℃ - 99℃ Accessory DC1-300 provides cooling from ambient to -20℃
Temperature control: PID Digital, 4 digit LED display, resolution 0.1℃
Temperature alarm: Under/over temperature alarm is automatically set 4℃ above and 4℃ below set point
Sensitivity: ±0.05℃
Uniformity: ±0.01℃
Timer: Variable 00:01 to 99:59 hh:mm Activates at set temperature. End timed period, audible buzzer and end message
Pump capacity and pressure: 10 litres/min - 150mbar Pressure drop can occur with pipe height, length, bore, bends and liquid temperatures below ambient
Pump connection ports: Inlet and outlet ports take 4mm bore x 6mm o/d tubing
6 Litre Heated, Timed, Ultrasonic bath, with drain outlet
Dimensions - External: 310w x 160d x 270h mm / Internal: 300w x 150d x 150h mm
Temperature Range: 30℃ to 80℃ in 5℃ increments.
Temp. Control: Analogue Dial Pointer
Timer: Time setting 1, 2, 3, 4, 5, 10, 15, 20, 25, 30 minutes and run time of up to 8 hours
Ultrasonic Effective Power: 150W
Ultrasonic peak power: 600W
Ultrasonic operating frequency: 37kHz
Supplied with a lid and basket.
Drain is easy to reach on the rear of the bath, with a drain tap on the side making it easy to open and close with clear symbols on position and function.