• Replacement sensor for LAQUAtwin B-771, EC-11, EC-22, and EC-33
• Requires a minimum of 0.12 ml sample
• Corrosion-resistant titanium / platinum black cell material
• Waterproof

• Easy to use
• Wireless-ready meters
• Charger suitable for wall mounting
• Smart meter module

Replacement sensor for ELITEPH Tester

Calibration Kit Set for TN100IR (0.02, 20.0, 100, 800 NTU), 4x60mL

• Spherical glass tip
• 3.5 connection
• Easy to use
• Glass electrode body
• Double junction reference
• CPS sleeve junction
• 6 months warranty

• Replacement sensor for LAQUAtwin Salt-11
• Requires a minimum of 0.12 ml sample
• Corrosion-resistant titanium / platinum black cell material
• Waterproof

• Y048 Sampling Sheet Holder
• If tiny particles are contained in a sample (e.g., soil extract), the particles influence measurement results. Please use sampling sheet B together with sampling sheet holder.
• For LAQUAtwin pocket meters, except conductivity and salt EC models

• pH measuring range 0 to 14
• Gel electrolyte
• Plastic shaft
• Integrated temperature sensor
• Safely measured values due to signal processing in the sensor
• Easy electrode replacement thanks to calibration data stored inside sensor
• Sensor quality monitoring by QSC function
• Memory for 10 calibration records
• QSC function

• Replacement sensor for the B-741,B-742,B-743,B-341,342,343
• Flat electrode for nitric ion which is so selective that pH or other ions do not affect it.

• 514-20 Conditioning Solution
• 14-ml x 6 bottles
• For LAQUAtwin EC-11, EC-22, EC-33, Salt-11

• Easy to use
• Wireless
• Full complete wireless module kit available

• Easy to use
• Wireless
• Full flexibility
• Includes rechargeable LiPo-battery
• Splash water protected (IP43)
• Measuring pH, ORP, oxygen, conductivity, turbidity

• Stainless steel blade
• 3.5 connection
• easy to use
• PVDF construction

• 514-23 12.9 mS/cm Conductivity Standard Solution
• 14-ml x 6 bottles
• For LAQUAtwin B-771, EC-11, EC-22, EC-33

• Recommended operating temperature: -5 to 70℃
• pH range: pH: 0 to 12
• Glass body material
• Supplied with BNC connector
• Supplied with 1m cable
• Suitable for pH measurement

• pH measuring range 0 to 14
• Safely measured values due to signal processing in the sensor
• Easy electrode replacement thanks to calibration data stored inside sensor
• Sensor quality monitoring by QSC function
• IDS pH microelectrode
• For measurement of small volumes and in small vessels
• Diameter 5mm
• QSC function
• Integrated temperature sensor
• Memory for 10 calibrations