• Range -20.0 to 80.0℃
• Weighted stainless steel probe with 3 m silicone cable
• Ideal for spot checks
• Instant measurement to HACCP requirements
• Small, lightweight, easy to clean
• CAL Check™ automatically verifies calibration at startup

• Simultaneous EC/TDS and temperature measurements on a large LCD display
• Selectable temperature unit
• HI-763063 dedicated EC/TDS temperature probe
• Probe quick-connect system with watertight connection (DIN)
• Battery life indication and low battery detection
• Auto-off function
• Keystroke confirmation tone
• Waterproof casing IP67

• Simultaneous EC/TDS and temperature measurements on a large LCD display
• Selectable temperature unit
• HI-763063 dedicated EC/TDS temperature probe
• Probe quick-connect system with watertight connection (DIN)
• Battery life indication and low battery detection
• Auto-off function
• Keystroke confirmation tone
• Waterproof casing IP67

• Spherical glass tip
• 3.5 connection
• Easy to use
• Glass electrode body
• Double junction reference
• CPS sleeve junction
• 6 months warranty

• Simultaneous pH and temperature measurements on a large dual-line LCD display
• Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
• Selectable temperature unit (℃)
• Electrode condition indicator
• mV of pH measurement for electrode check
• HI-12963 dedicated pH with an integral temperature sensor
• Probe quick connect system
• Battery life indication and low battery detection
• Keystroke confirmation tone
• Auto-off function
• Waterproof casing IP67

• Free chlorine in water up to 5.00 mg/L (ppm)
• No warm-up time before taking a measurement
• Tutorial mode for step-by-step instructions
• Uses either powder or cost-saving liquid reagents

• No warm-up time before taking a measurement
• Tutorial mode for step-by-step instructions
• Uses either powder or cost-saving liquid reagents

• Free and total chlorine in water up to 5.00 mg/L (ppm)
• No warm-up time before taking a measurement
• Tutorial mode for step-by-step instructions
• Uses either powder or cost-saving liquid reagents

• MR Ammonia levels where0 to 10.00 mg/L (as NH3-N)
• No warm-up time before taking a measurement
• Tutorial mode for step-by-step instructions
• Displays results in multiple chemical forms

• Free chlorine in water up to 5.00 mg/L (ppm) (as Cl2
• Total chlorine UHR 0 to 500mg/L (as Cl2
• No warm-up time before taking a measurement
• Tutorial mode for step-by-step instructions
• Uses either powder or cost-saving liquid reagents

• HI-2202 edge®blu pH Bluetooth® Meter with HALO™ HI-11102 gel-filled Bluetooth electrode
• Two USB ports
• Store up to 1000 log records of data
• GLP Data of the last calibration you perform is stored
• Capacitive touch keypad
• Easy to read 14 cm LCD with wide 150∞ viewing angle
• CAL Check™ technology to warn you if the electrode bulb is not clean or if the buffers are contaminated during calibration

• Simultaneous pH and temperature measurements on a large dual-line LCD display
• Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
• Selectable temperature unit (℃ or ∞F)
• Electrode condition indicator
• mV or pH measurement for electrode check
• HI-12923 dedicated pH probe with integrated temperature sensor
• Probe quick connect system
• Battery life indication and low battery detection
• Keystroke confirmation tone
• Auto-off function
• Waterproof casing IP67

• Simultaneous pH, ORP and temperature measurements on a large three-line LCD display
• Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
• User-friendly two-button design
• Selectable temperature unit (℃)
• Electrode condition indicator
• mV of pH measurement for electrode check
• HI-12973 dedicated pH/ORP with integral temperature sensor
• Probe quick connect system
• Battery life indication and low battery detection
• Keystroke confirmation tone
• Auto-off function
• Waterproof casing IP67

• Simultaneous pH and temperature measurements on a large dual-line LCD Display
• Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
• Selectable temperature unit ℃ or ∞F
• Electrode condition indicator
• mV of pH measurement for electrode check
• HI-629113 dedicated pH with an integral temperature sensor
• Probe quick connect system
• Battery life indication and low battery detection
• Keystroke confirmation tone
• Auto-off function
• Waterproof casing IP67

• Clogging Prevention System (CPS™)
• Automatic Temperature Compensation (ATC)
• Two-point calibration
• Battery Error Prevention System (BEPS) - alerts the user of low battery power that could adversely affect readings
• Simultaneous pH and temperature measurements on a large dual-line LCD display
• User-friendly two-button design
• Application-specific probe
• Durable IP67 waterproof casing
• Watertight probe connection
• Probe condition indicator
• Automatic pH calibration at one or two points within two memorized buffer sets (standard or NIST)
• On-screen calibration tags
• mV of pH measurement for electrode check
• Selectable temperature unit (℃ or ∞F)
• Auto-off function
• Battery life indication and low battery detection

• Simultaneous pH, ORP and temperature measurements on a large three-line LCD display
• Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
• User-friendly two-button design
• Selectable temperature unit (℃)
• Electrode condition indicator
• mV of pH measurement for electrode check
• HI-12973 dedicated pH/ORP with integral temperature sensor
• Probe quick connect system
• Battery life indication and low battery detection
• Keystroke confirmation tone
• Auto-off function
• Waterproof casing IP67

• User-friendly two-button design
• Application-specific probe
• Durable IP67 waterproof casing
• Watertight probe connection
• Probe condition indicator

• Simultaneous pH, ORP and temperature measurements on a large three-line LCD display
• Automatic pH calibration at one or two points within two memorised buffer sets (standard or NIST)
• User-friendly two-button design
• Selectable temperature unit (℃)
• Electrode condition indicator
• mV of pH measurement for electrode check
• HI-12973 dedicated pH/ORP with integral temperature sensor
• Probe quick connect system
• Battery life indication and low battery detection
• Keystroke confirmation tone
• Auto-off function
• Waterproof casing IP67

HI-97701C kit is supplied with:

• HI-97701 Free Chlorine Advanced Photometer
• CAL Check standards
• 2 x Cuvettes
• 2 x Caps
• 2 x Plastic inserts for cuvettes
• Scissors
• Cuvette cleaning cloth
• 3 x 1.5V AA batteries
• Instruction manual
• Instrument quality certificate.

HI-97710C kit is supplied with:

• HI-97710 pH, Free & Total Chlorine Advanced Photometer
• CAL Check standards
• 2 x Cuvettes
• 2 x Caps
• 2 x Plastic inserts for cuvettes
• Scissors
• Cuvette cleaning cloth
• 3 x 1.5V AA batteries
• Instruction manual
• Instrument quality certificate.

HI-97711C kit is supplied with:

• HI-97711C Free & Total Chlorine Advanced Photometer
• CAL Check standards
• 2 x Cuvettes
• 2 x Caps
• 2 x Plastic inserts for cuvettes
• Scissors
• Cuvette cleaning cloth
• 3 x 1.5V AA batteries
• Instruction manual
• Instrument quality certificate.

HI-97715C kit is supplied with:

• HI-97715C Ammonia Medium Range Advanced Photometer
• CAL Check standards
• 2 x Cuvettes
• 2 x Caps
• 2 x Plastic inserts for cuvettes
• Scissors
• Cuvette cleaning cloth
• 3 x 1.5V AA batteries
• Instruction manual
• Instrument quality certificate.

HI-97771C kit is supplied with:

• HI-97771 Free Chlorine & Total Chlorine UHR Advanced Photometer
• CAL Check standards
• 2 x Cuvettes
• 2 x Caps
• 2 x Plastic inserts for cuvettes
• Scissors
• Cuvette cleaning cloth
• 3 x 1.5V AA batteries
• Instruction manual
• Instrument quality certificate.

• Simultaneous, pH, EC/TDS and temperature measurements on a large three-line LCD display
• Selectable temperature unit
• pH electrode condition display
• mV of pH measurement for electrode check
• Last calibration points pH and EC
• HI-12886 dedicated pH/EC/TDS/temperature probe
• Probe quick connect system
• Battery life indication and low battery detection
• Auto-off function
• Keystroke confirmation tone
• Waterproof casing IP67

• Simultaneous EC/TDS and temperature measurements on a large LCD display
• Selectable temperature unit
• HI-763063 dedicated EC/TDS temperature probe
• Probe quick-connect system with watertight connection (DIN)
• Battery life indication and low battery detection
• Auto-off function
• Keystroke confirmation tone
• Waterproof casing IP67

• ±0.002 pH accuracy
• Specialised electrode for testing of mash and wort during the brewing process
• Increased traceability
• Versatile data logging
• Superior field usability
• pH 4 & 7 buffer sachets

• Extended DO range up to 90ppm (mg/L) and 600%
• Three salinity scales: practical salinity, natural seawater, percent
• Measures DO, atmospheric pressure & temperature
• Manual salinity compensation
• Temperature and atmospheric pressure automatic compensation
• Large log memory with different logging methods
• Polarographic probe with built-in temperature sensor

• High accuracy at low ranges (below 0.05 NTU)
• Two, three or four-point calibration
• USB and RS232 PC connectivity
• Log up to 200 records
• Current time on display continuously
• Equipped with Fast Tracker™ Tag Identification System

Please order this product over the telephone, so that we can make sure the product is correct for your requirements.

• Easy to use
• Piston driven dosing
• Automatic stirrer speed control
• CAL Check™
• mV meter
• Graphic mode/exportable data
• GLP feature
• PC Interface