Microtube insert for 96 x 0.2ml tubes or 12 x 0.2ml strips or 96 well semi/unskirted PCR plates for Grant Instruments MPS-1 High Speed Shaker/Vortex Mixer
Replacement platform for 8 tubes up dia. 20-30mm tube volumes up to 50ml and 22 tubes up to dia. 10-16mm tube volumes up to 1.5-15ml for Grant Instruments PTR-60
Holds 4 tubes up to dia. 20-30mm tube volume 50ml and 12 tubes up to dia. 10-16mm tube volume 1.5-15ml for Grant Instruments PTR-25 360∞ Vertical Mini Rotator
Pressure-sensitive cup accommodates tubes up to 20mm diameter
Reliable and extremely quiet motor produces regulated and reproducible agitation throughout the speed range
Extremely easy to operate – select either ‘continuous' or ‘touch' operation and turn the knob to adjust the speed from 750 rpm to 3000 rpm
In ‘touch' mode, agitation starts in response to pressure on the pressure-sensitive cup.
Exceptionally compact with a low profile and small footprint – fits into almost any location
Rubber suction pads hold tight to the work surface and prevent the unit from ‘walking' – they also absorb vibration and prevent its transmission to the workbench
Handles up to 32 tubes in three different sizes/combinations
Additional VP-1 flat head for single tube mixing supplied with unit
Compact rugged design plus powerful motor delivering consistent performance and quiet operation – fits neatly and unobtrusively into the workspace
Rubber suction pads hold tight to the work surface and prevent the unit from ‘walking' – they also absorb vibration and prevent its transmission to the workbench
Extremely easy to operate – select either ‘continuous' or ‘touch' operation and turn the knob to adjust the speed from 500 rpm to 3000 rpm
The 32-socket universal platform for three tubes sizes (16 x 1.5ml, 8 x 0.5 ml, 8 x 0.2ml) and a tip for mixing individual tubes up to 15ml provide maximum flexibility for different applications.
Quick and easy screw fitting of any standard-depth 96-
Continuous or timed operation, with automatic switch off
Platform for two microtitre plates supplied as standard. Platform for four plates (MPP-4) available as an option
Easy-to-use integral electronic timer ensure accurate count-down and repeatability of time-sensitive incubations
Quick and easy to use screw fittings keep the plates securely in position and allow fitting on any standard-depth 96-
Easy to read LED display clearly indicates time remaining on timed operations and speed in rpm
Simple graduated dial to adjust the speed to suit the application: – gentle shaking to ensure that the well contents remain in situ, or more vigorous agitation for effective aeration across the surface area of each well
3D rotation, reciprocation and vibration functions all in one product
3D rotation speed: 1 to 100 rpm
Reciprocal 3D rotation: 1 to 360 deg. turning angle
Vibration: 1 to 6∞ turning angle, programmable in a burst of 1 to 5 seconds
Fully programmable sequence of functions
Loads up to 1.0 kg
Very easy to operate, with simple set-up of multi-segment programs via push buttons and the 2-line LCD status display
Compact, with a low profile and small footprint, and extremely quiet in operation - fits neatly and unobtrusively into the workspace
Smooth, non-slip mat supplied as standard - prevents vessels from slipping
All actions - rotation, reciprocation and vibration - can be set for continuous or timed operation, or linked together in different combinations to ensure optimum mixing conditions for your application
Reliable stepper motor and sturdy construction will deliver years of consistent performance
Ambient operating temperature range of 4 to 40℃ allows use in cold room or incubator.
360° vertical rotation – creates long wave motion for mixing large particles
Reciprocation – creates long and medium wave motion for medium and large particles
Vibration – creates short wave motion for mixing for small particles
360° vertical rotation, reciprocation and vibration can be set for continuous or timed operation, or linked together in different combinations to ensure optimum mixing conditions for your application
Choice of two models – PTR-35 or PTR-60 – with different speeds and microtube capacities
Vertical rotation speed: 1 to 100 rpm
Reciprocal rotation: 1 to 90° turning angle
Vibration: programmable in a burst of 1 to 5 seconds
Very easy to operate, with simple set-up of multi-segment programs via push buttons and the 2-line LCD status display, fully programmable sequence of functions, including pause
Capacity of up to 26 (PTR-35), 48 (PTR-60) microtubes and a maximum rotating speed of up to 100 rpm.
Optional accessory platform for accommodating tubes of different diameters
Interchangeable platforms for use with a variety of vessels
Loads up to 3 kg
Continuous or timed operation with automatic switch-off
Reliable direct drive system
Automatic load balancing system
Soft start feature ensures a smooth ramp-up – avoids potential damage to vessel content
Exceptionally quiet motor – consistent even shaking
2-line LCD display clearly indicates both set and actual shaking speed, plus set and elapsed time. Works in combination with simple push buttons for easy set-up
Choice of 4 interchangeable platforms to suit different types of vessels – maximum flexibility
Low voltage power supply provides for safe cold room operation and low energy consumption
Ambient operating temperature range of 4 to 40ºC allows use in cold room or incubator
Integral electronic timer with audible alarm and automatic switch-off – accurate repeatability of time-sensitive incubations
360° vertical rotation – creates long wave motion for mixing large particles
Reciprocation – creates long and medium wave motion for medium and large particles
Vibration – creates short wave motion for mixing for small particles
360° vertical rotation, reciprocation and vibration can be set for continuous or timed operation, or linked together in different combinations to ensure optimum mixing conditions for your application
Choice of two models – PTR-35 or PTR-60 – with different speeds and microtube capacities
Vertical rotation speed: 1 to 100 rpm
Reciprocal rotation: 1 to 90° turning angle
Vibration: programmable in a burst of 1 to 5 seconds
Very easy to operate, with simple set-up of multi-segment programs via push buttons and the 2-line LCD status display, fully programmable sequence of functions, including pause
Capacity of up to 26 (PTR-35), 48 (PTR-60) microtubes and a maximum rotating speed of up to 100 rpm.
Optional accessory platform for accommodating tubes of different diameters
Continuous or timed operation, with automatic switch-off
Reliable and quiet motor produces regulated and reproducible rocking throughout the speed range
Compact, sturdy construction with a low profile and small footprint – fits neatly into the smallest workspace
Easy-to-read LCD screen displaying actual and set time, speed and set angle
Smooth, non-slip mat supplied as standard – prevents vessels from slipping
Select either continuous or timed operation – the integral electronic timer ensures accurate count-down for repeatability of time-sensitive incubations
Ideal for use in cold rooms and incubators. Low voltage cord easily fits through incubator door gaskets.
Grant Instruments TS-DW Deep well plate Thermoshaker designed for shaking and heating of deep well plates. A multisystem principle, used in the design of the thermoshaker allows it to operate as 3 independent devices:
Temperature stability ± 0.1℃, temperature uniformity ± 0.2℃ due to the bi-directional heating system (platform and lid)
Shaking speed: 250 to 1200rpm
Rapid heat-up
Continuous or timed operation, with alarm buzzer and automatic switch-off facility
Choice of two models with capacity for two (PHMP) or four (PHMP-4) 96- or 384-well microplates
The heated lid completely covers the flat heating plate to provide bi-directional heating and excellent temperature stability and uniformity, whilst preventing condensation
Combination of bi-directional heating and powerful orbital shaking capability produces the maximum yield from incubations
Very easy to operate, with simple set-up of temperature, shaking speed and time via push buttons and the 2-line LCD status display
