The Combi-spin is supplied as standard with two interchangeable rotors for 12x1.5ml and 12x0.5ml + 12x0.2ml microtubes
Optional accessory rotors - for 16 and 18 microtubes and for two 8-well 0.2.ml strips - allow for quick and easy changes of application
Capacity: 12 x 1.5ml microtubes
Centrifugation 2800rpm at 50Hz and 3500rpm at 60Hz
The vortex cup emerges through an opening in the closed lid, enabling individual tubes to be mixed while a full load of tubes is spinning
Capacity: 12 x 0.5ml plus 12 x 0.2ml microtubes
Very simple to operate - use the left-hand button to select continuous or short spin. A safety interlock stops the rotor when the lid is opened to ensure you and your workplace remain safe
Flexible for the user by offering a choice of either a single tip operation or a multi-tip option with 8 tips for use on standard PCR type plates.
The integrated micro-biological filter is hydrophobic and designed to trap any bacteria, viruses or infected particles which may have been present in the aspirated solutions.
The unit can stand directly inside a workstation, supplied with a slim 12V power cord
Quick and easy screw fitting of any standard-depth 96-
Continuous or timed operation, with automatic switch off
Platform for two microtitre plates supplied as standard. Platform for four plates (MPP-4) available as an option
Easy-to-use integral electronic timer ensure accurate count-down and repeatability of time-sensitive incubations
Quick and easy to use screw fittings keep the plates securely in position and allow fitting on any standard-depth 96-
Easy to read LED display clearly indicates time remaining on timed operations and speed in rpm
Simple graduated dial to adjust the speed to suit the application: – gentle shaking to ensure that the well contents remain in situ, or more vigorous agitation for effective aeration across the surface area of each well
A safety interlock stops the rotor when the lid is opened to ensure you and your workplace remain safe.
Compact design and extremely quiet in operation - fits neatly and unobtrusively into the workspace
Spin and mix phases can be linked in sequences which can be repeated up to 999 times.
Centrifugation speed from 1000 to 6000rpm
Multi-spin enables consecutive spin and mix phases of multiple tubes - tubes are loaded into the rotor for spinning and remain in position for vortex mixing, saving time and labour. In addition, lower reagent volumes can be used, providing a further saving.
Simple push-buttons and a clear 2-line LCD status display enable an accurate and repeatable set of spin and mix levels and times.
3D rotation, reciprocation and vibration functions all in one product
3D rotation speed: 1 to 100 rpm
Reciprocal 3D rotation: 1 to 360 deg. turning angle
Vibration: 1 to 6∞ turning angle, programmable in a burst of 1 to 5 seconds
Fully programmable sequence of functions
Loads up to 1.0 kg
Very easy to operate, with simple set-up of multi-segment programs via push buttons and the 2-line LCD status display
Compact, with a low profile and small footprint, and extremely quiet in operation - fits neatly and unobtrusively into the workspace
Smooth, non-slip mat supplied as standard - prevents vessels from slipping
All actions - rotation, reciprocation and vibration - can be set for continuous or timed operation, or linked together in different combinations to ensure optimum mixing conditions for your application
Reliable stepper motor and sturdy construction will deliver years of consistent performance
Ambient operating temperature range of 4 to 40℃ allows use in cold room or incubator.
360° vertical rotation – creates long wave motion for mixing large particles
Reciprocation – creates long and medium wave motion for medium and large particles
Vibration – creates short wave motion for mixing for small particles
360° vertical rotation, reciprocation and vibration can be set for continuous or timed operation, or linked together in different combinations to ensure optimum mixing conditions for your application
Choice of two models – PTR-35 or PTR-60 – with different speeds and microtube capacities
Vertical rotation speed: 1 to 100 rpm
Reciprocal rotation: 1 to 90° turning angle
Vibration: programmable in a burst of 1 to 5 seconds
Very easy to operate, with simple set-up of multi-segment programs via push buttons and the 2-line LCD status display, fully programmable sequence of functions, including pause
Capacity of up to 26 (PTR-35), 48 (PTR-60) microtubes and a maximum rotating speed of up to 100 rpm.
Optional accessory platform for accommodating tubes of different diameters
Temperature range ambient +5ºC to 130ºC, with rapid heat-up time
Stability: ±0.1ºC
Uniformity: ±0.1ºC
Digital temperature control for optimal precision
Range of convenient features including alarms, single and dual point calibration, programmed start/stop, ‘offset' for known sample temperature variation and choice of external or internal probes
Includes block removal tool for easy and safe removal of blocks.
Interchangeable platforms for use with a variety of vessels
Loads up to 3 kg
Continuous or timed operation with automatic switch-off
Reliable direct drive system
Automatic load balancing system
Soft start feature ensures a smooth ramp-up – avoids potential damage to vessel content
Exceptionally quiet motor – consistent even shaking
2-line LCD display clearly indicates both set and actual shaking speed, plus set and elapsed time. Works in combination with simple push buttons for easy set-up
Choice of 4 interchangeable platforms to suit different types of vessels – maximum flexibility
Low voltage power supply provides for safe cold room operation and low energy consumption
Ambient operating temperature range of 4 to 40ºC allows use in cold room or incubator
Integral electronic timer with audible alarm and automatic switch-off – accurate repeatability of time-sensitive incubations
Temperature range ambient +5ºC to 200ºC, with rapid heat-up time
Stability: ±0.1ºC
Uniformity: ±0.1ºC
Digital temperature control for optimal precision
Range of convenient features including alarms, single and dual point calibration, programmed start/stop, ‘offset' for known sample temperature variation and choice of external or internal probes
Includes block removal tool for easy and safe removal of blocks.
Temperature range ambient +5ºC to 130ºC, with rapid heat-up time
Stability: ±0.1ºC
Uniformity: ±0.1ºC
Digital temperature control for optimal precision
Range of convenient features including alarms, single and dual point calibration, programmed start/stop, ‘offset' for known sample temperature variation and choice of external or internal probes
Includes block removal tool for easy and safe removal of blocks.
Temperature range ambient +5ºC to 130ºC, with rapid heat-up time
Stability: ±0.1ºC
Uniformity: ±0.1ºC
Digital temperature control for optimal precision
Range of convenient features including alarms, single and dual point calibration, programmed start/stop, ‘offset' for known sample temperature variation and choice of external or internal probes
Includes block removal tool for easy and safe removal of blocks.
Constant airflow around the rotor reduces the risk of samples overheating during centrifugation
Simple push-buttons and a clear 2-line LCD status display shows actual and set values of time, set an actual speed and relative centrifugal force (g-force)
360° vertical rotation – creates long wave motion for mixing large particles
Reciprocation – creates long and medium wave motion for medium and large particles
Vibration – creates short wave motion for mixing for small particles
360° vertical rotation, reciprocation and vibration can be set for continuous or timed operation, or linked together in different combinations to ensure optimum mixing conditions for your application
Choice of two models – PTR-35 or PTR-60 – with different speeds and microtube capacities
Vertical rotation speed: 1 to 100 rpm
Reciprocal rotation: 1 to 90° turning angle
Vibration: programmable in a burst of 1 to 5 seconds
Very easy to operate, with simple set-up of multi-segment programs via push buttons and the 2-line LCD status display, fully programmable sequence of functions, including pause
Capacity of up to 26 (PTR-35), 48 (PTR-60) microtubes and a maximum rotating speed of up to 100 rpm.
Optional accessory platform for accommodating tubes of different diameters
Cooling/heating setting range from – 10ºC to 100℃, with very rapid cool down and heat-up times
Stability ± 0.1℃, uniformity ±0.25℃ at 37℃
Convenient integral reaction timer with audible alarm
Dry temperature control system maintains a clean and vibration-free working environment
A 2-line LCD display clearly indicates both set and actual values for temperature and time. Works in combination with simple push buttons for easy set-up.
Flexible tube sizes and rapid heat-up/cool-down times enables swift change of application
Cooling/heating setting range from – 10ºC to 100℃, with very rapid cool down and heat-up times
Stability ± 0.1℃, uniformity ±0.25℃ at 37℃
Convenient integral reaction timer with audible alarm
Dry temperature control system maintains a clean and vibration-free working environment
A 2-line LCD display clearly indicates both set and actual values for temperature and time. Works in combination with simple push buttons for easy set-up.
Flexible tube sizes and rapid heat-up/cool-down times enables swift change of application
Cooling/heating setting range from – 10ºC to 100℃, with very rapid cool down and heat-up times
Stability ± 0.1℃, uniformity ±0.25℃ at 37℃
Convenient integral reaction timer with audible alarm
Dry temperature control system maintains a clean and vibration-free working environment
A 2-line LCD display clearly indicates both set and actual values for temperature and time. Works in combination with simple push buttons for easy set-up.
Flexible tube sizes and rapid heat-up/cool-down times enables swift change of application
Continuous or timed operation, with automatic switch-off
Reliable and quiet motor produces regulated and reproducible rocking throughout the speed range
Compact, sturdy construction with a low profile and small footprint – fits neatly into the smallest workspace
Easy-to-read LCD screen displaying actual and set time, speed and set angle
Smooth, non-slip mat supplied as standard – prevents vessels from slipping
Select either continuous or timed operation – the integral electronic timer ensures accurate count-down for repeatability of time-sensitive incubations
Ideal for use in cold rooms and incubators. Low voltage cord easily fits through incubator door gaskets.
Grant Instruments TS-DW Deep well plate Thermoshaker designed for shaking and heating of deep well plates. A multisystem principle, used in the design of the thermoshaker allows it to operate as 3 independent devices:
Temperature stability ± 0.1℃, temperature uniformity ± 0.2℃ due to the bi-directional heating system (platform and lid)
Shaking speed: 250 to 1200rpm
Rapid heat-up
Continuous or timed operation, with alarm buzzer and automatic switch-off facility
Choice of two models with capacity for two (PHMP) or four (PHMP-4) 96- or 384-well microplates
The heated lid completely covers the flat heating plate to provide bi-directional heating and excellent temperature stability and uniformity, whilst preventing condensation
Combination of bi-directional heating and powerful orbital shaking capability produces the maximum yield from incubations
Very easy to operate, with simple set-up of temperature, shaking speed and time via push buttons and the 2-line LCD status display